Download Print this page

IBM 9006-22C Installing And Configuring

Hide thumbs

Advertisement

Quick Links

Power Systems
Installing and configuring the IBM Power
System LC922 (9006-22P)
IBM

Advertisement

loading

  Related Manuals for IBM 9006-22C

  Summary of Contents for IBM 9006-22C

  • Page 1 Power Systems Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 2 Note Before using this information and the product it supports, read the information in “Safety notices” on page v, “Notices” on page 123, the IBM Systems Safety Notices manual, G229-9054, and the IBM Environmental Notices and User Guide, Z125–5823. ®...
  • Page 3: Table Of Contents

    Common procedures for servicing or installing features in the 5104-22C, 9006-22C, or 9006-22P system................ 99 Before you begin servicing........................99 Identifying the 5104-22C, 9006-12P, 9006-22C, or 9006-22P system that contains the part to replace..............................102 LEDs on the 5104-22C, 9006-22C, or 9006-22P system..............102 Identifying the 5104-22C, 9006-12P, 9006-22C, or 9006-22P that needs servicing....
  • Page 4 Notices......................123 Accessibility features for IBM Power Systems servers................124 Privacy policy considerations ......................... 125 Trademarks.............................. 125 Electronic emission notices........................126 Class A Notices...........................126 Class B Notices...........................129 Terms and conditions..........................132...
  • Page 5: Safety Notices

    Das Produkt ist nicht für den Einsatz an Bildschirmarbeitsplätzen im Sinne § 2 der Bildschirmarbeitsverordnung geeignet. Laser safety information IBM servers can use I/O cards or features that are fiber-optic based and that utilize lasers or LEDs. Laser compliance IBM servers may be installed inside or outside of an IT equipment rack.
  • Page 6 • To avoid hazardous conditions due to uneven mechanical loading, always install the heaviest devices in the bottom of the rack cabinet. Always install servers and optional devices starting from the bottom of the rack cabinet. vi Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 7 • Rack-mounted devices are not to be used as shelves or work spaces. Do not place objects on top of rack-mounted devices. In addition, do not lean on rack mounted devices and do not use them to stabilize your body position (for example, when working from a ladder). •...
  • Page 8 DANGER: Hazardous voltage, current, or energy levels are present inside any component that has this label attached. Do not open any cover or barrier that contains this label. (L001) (L002) viii Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 9 DANGER: Rack-mounted devices are not to be used as shelves or work spaces. Do not place objects on top of rack-mounted devices. In addition, do not lean on rack-mounted devices and do not use them to stabilize your body position (for example, when working from a ladder). (L002) (L003) Safety notices ix...
  • Page 10 There are no serviceable parts inside the device. • Use of the controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. (C026) x Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 11 Exchange only with the IBM-approved part. Recycle or discard the battery as instructed by local regulations. In the United States, IBM has a process for the collection of this battery. For information, call 1-800-426-4333. Have the IBM part number for the battery unit available when you call.
  • Page 12 Freewheeling will cause uneven cable wrapping around winch drum, damage cable, and may cause serious injury. • This TOOL must be maintained correctly for IBM Service personnel to use it. IBM shall inspect condition and verify maintenance history before operation. Personnel reserve the right not to use TOOL if inadequate.
  • Page 13 The dc-powered system employs an isolated DC return (DC-I) design. The DC battery return terminal shall not be connected to the chassis or frame ground. The dc-powered system is intended to be installed in a common bonding network (CBN) as described in GR-1089-CORE.
  • Page 14 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 15: Installing And Configuring The System

    About this task You might need to read the following documents before you begin to install the server: • The latest version of this document is maintained online, see Installing the IBM Power System (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22c_install_kickoff.htm). • To plan your server installation, see Planning for the system (http://www.ibm.com/support/ knowledgecenter/POWER9/p9ia4/p9ia4_90x_kickoff.htm).
  • Page 16: Determining And Marking The Location In The Rack For The System

    • The Directory of worldwide contacts website http://www.ibm.com/planetwide. Select your location to view the service and support contact information. Determining and marking the location in the rack for the 5104-22C, 9006-22C, or 9006-22P system You might need to determine where to install the system unit into the rack.
  • Page 17 3. If necessary, remove the filler panels to allow access to the inside of the rack enclosure where you plan to place the system unit, as shown in Figure 1 on page 4. Installing and configuring your system and system features 3...
  • Page 18: Attaching The Rails To The Rack And To The System

    10. Mark the corresponding holes on the left side of the rack. Attaching the rails to the rack and to the 5104-22C, 9006-22C, or 9006-22P system You must install the rails onto the chassis and into the rack. Use this procedure to complete this task.
  • Page 19 Do not install mismatched hardware by using washers or spacers. If you do not have the correct rails and fittings for your rack, contact your IBM reseller. Note: The system requires 2 EIA rack units (2U) of space.
  • Page 20 Secure the inner chassis slide rail to the system chassis by using two screws (C). b. Repeat this step for the left chassis slide rail. 6 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 21: Installing The System Into The Rack And Connecting And Routing Power Cables

    11. Move to the front of the rack. Secure the rails to the rack by fastening one screw through each hole in each rail and through the EIA support flange. Installing the 5104-22C, 9006-22C, or 9006-22P system into the rack and connecting and routing power cables After you install the system onto the rails in the rack, connect and route power cables.
  • Page 22: Completing Server Setup

    12. Continue with “Completing server setup” on page 8. Completing server setup Learn how to set up your server. Procedure 1. Connect your server to a VGA terminal and keyboard or a console. 8 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 23: Installing Drives

    3. You can receive important technical information and updates for specific IBM Support tools and resources by subscribing to receive updates. To subscribe to receive updates, complete the following steps: a.
  • Page 24 Figure 4. Up to 8 SAS or SATA drives, or a mix of SAS HDDs and SATA SSDs (eight drives total), four NVMe drives attached to an NVMe adapter, and up to two DOMs 10 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 25 Figure 5. Up to eight SAS or SATA drives attached to a SAS/SATA adapter, up to four SAS or SATA drives attached to integrated controller, and up to two DOMs Table 3. Number of allowed front SAS/SATA drives with enhanced LSI drive backplane. The enhanced LSI drive backplane requires a SAS/SATA adapter.
  • Page 26 SATA adapter, four NVMe drives attached to an NVMe adapter, and up to two DOMs SATA Drives The 9006-22C system with direct attach drive backplane can support up to 12 SATA drives. The drives are directly connected to the SATA ports and to the controller on the system backplane. The SATA drives can be installed into the front drive bay locations.
  • Page 27: Installing A Front Drive

    Figure 10. NVMe drives go in locations 9 through 12 Installing a front disk drive in the 9006-22P system Learn how to install a disk drive in the front of the IBM Power System LC922 (9006-22P) system. Before you begin You can install SATA and SAS front drives with the system powered on and running.
  • Page 28 • A 3.5-inch drive fills the tray, as shown in Figure 12 on page 15. Fasten the drive to the sides of the tray with four screws (two screws on each side). 14 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 29 Figure 12. Mounting the 3.5-inch drive in the tray • A 2.5-inch drive slides into the rear of the tool-less drive carrier. a. Turn the tray upside down as shown in Figure 13 on page 16. b. Open the retention spring (B) as shown in Figure 14 on page 17. c.
  • Page 30 Figure 13. Turning the 2.5-inch tray upside-down 16 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 31 Figure 14. Mounting the 2.5-inch drive in the tray 6. Ensure that the drive handle is open. Support the drive by the bottom as you position the drive, and insert it into the drive slot. Ensure that the drive is fully seated and is all the way into the system. 7.
  • Page 32 Figure 15. Disk drive lock detail 8. If you installed an NVMe drive, power the system back on. For instructions, see “Starting the 5104-22C, 9006-12P, 9006-22C, or 9006-22P system ” on page 108. 9. For a non-RAID drive, configure the installed drive for your environment. If the drive is part of a RAID configuration, skip this step, the drive is detected and configured when inserted.
  • Page 33: Installing A Rear Drive

    10. Load or restore data from your backup media. Installing a rear disk drive in the 9006-22P system Learn how to install a disk drive in the rear of the IBM Power System LC922 (9006-22P) system. Before you begin Rear drives are an optional feature. You can install SATA and SAS rear drives with the system powered on and running.
  • Page 34 Ensure that the tray is open. Orient the drive such that the connectors are pointing to the rear of the tray. Ensure that the screw holes (A) in the drive align with the pins (B) in the tray as shown in Figure 17 on page 21. 20 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 35 Figure 17. Inserting the rear drive in the tray 5. While checking the alignment pins, press the sides (A) of the tray together until button (B) snaps into place as shown in Figure 18 on page 22. Installing and configuring your system and system features 21...
  • Page 36 Ensure that the drive is fully seated and is all the way into the system. 7. Lock the drive bay handle (A) by pushing in the handle release until it locks at (B) as shown in Figure 19 on page 23. 22 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 37 Figure 19. Disk drive lock detail 8. For a non-RAID drive, configure the installed drive for your environment. If the drive is part of a RAID configuration, skip this step, the drive is detected and configured when inserted. After you insert the new drive, you need to rescan for the device. Ubuntu Linux operating system To run the rescan-scsi-bus command in the Ubuntu Linux operating system, log in to the system as the root user, and run the following command:...
  • Page 38: Installing A Drive On Module

    9. Load or restore data from your backup media. Installing a drive on module in the 9006-22C system Learn how to install a drive on module (DOM) in the IBM Power System LC922 (9006-22P) system. Before you begin Power off the system and place it in the service position. For instructions, see “Preparing the 5104-22C, 9006-22C, or 9006-22P system to remove and replace internal parts”...
  • Page 39 Figure 20. Installing a DOM 3. Prepare the system for operation. For instructions, see “Preparing the 5104-22C, 9006-22C, or 9006-22P system for operation after you remove and replace internal parts” on page 107. 4. For a non-RAID drive, configure the installed drive for your environment. If the drive is part of a RAID configuration, skip this step, the drive is detected and configured when inserted.
  • Page 40: Installing Memory

    Learn how to install memory in the IBM Power System LC922 (9006-22P) system. Placement rules for memory in the 9006-12P or 9006-22P system Learn about the configurations and rules that apply to adding memory to the IBM Power System LC921 (9006-12P) or IBM Power System LC922 (9006-22P) system.
  • Page 41 Figure 21. Two-processor memory plugging sequence Table 5. Single-processor memory plugging sequence Slot Location Plugging Sequence P1-A1 and P1-B1 P1-C1 and P1-D1 P1-A2, P1-B2, P1-C2, and P1-D2 Installing and configuring your system and system features 27...
  • Page 42: Installing Memory In The 9006-22P System

    Before you begin Power off the system and place it in the service position. For instructions, see “Preparing the 5104-22C, 9006-22C, or 9006-22P system to remove and replace internal parts” on page 105. Procedure 1. Attach the electrostatic discharge (ESD) wrist strap.
  • Page 43 3. Depending on the memory locations, you might need to remove the system processor air baffle. Carefully unsnap and lift the processor air baffle from the system. 4. Push the DIMM locking tabs away from the socket. 5. Insert the memory DIMM. a) Grasp the memory DIMM along its edges and align it with the slot on the system backplane.
  • Page 44: Installing A Pcie Adapter

    What to do next Prepare the system for operation. For instructions, see “Preparing the 5104-22C, 9006-22C, or 9006-22P system for operation after you remove and replace internal parts” on page 107. Installing a PCIe adapter in the 9006-22P system Find information about how to install Peripheral Component Interconnect Express (PCIe) adapters into the system.
  • Page 45 Table 7. PCIe slot locations and descriptions for the 9006-22P system Slot location CPU Connection Description Adapter size Coherent Accelerator Processor Interface (CAPI) 1 (UIO Slot2) CPU1-PEC1 PCIe4 x8 Full-height, full- length 2 (UIO Slot1) CPU1-PEC0 PCIe4 x16 Double-wide, full- height, full-length 3 (WIO Slot1) CPU2-PEC0...
  • Page 46 Mellanox MCX556A- 2, 3, 1, 5, 6 EDAT ConnectX-5 VPI EDR InfiniBand 100 Gb/s and 100 GbE Dual-port QSFP28 PCIe4.0 x16 LP; Adapter part number: 01EM691 (AOC- MCX556A-EDAT- IB001) 32 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 47 Table 8. PCIe adapters supported in the 9006-22P system (continued) Feature code Description 9006-22P (1 processor) 9006-22P (2 processors) Slot priority Maximum Slot priority Maximum number of number of adapters adapters supported supported EKEA Broadcom (LSI) 1, 2 4, 1, 5, 6, 3, 2 MegaRAID 9361-8i SAS3 Controller with 8 Internal Ports (1 GB...
  • Page 48 (AOC-STG-i4S) EKFP Intel XL710/X557 1, 2 4, 1, 5, 6, 3, 2 10GBase-T Converged Network Adapter Quad-port (10G/1G/ 100M speeds) PCIe3.0 x8 LP; Adapter part number: 01EM696 (AOC-STG-i4T) 34 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 49: Pcie Adapters By Fc For The 9006-22P

    PCIe adapter information by feature type for the 9006-22P system Find information about the Peripheral Component Interconnect Express (PCIe) adapters that are supported for the IBM Power System LC922 (9006-22P). The table shows the available adapters by feature code (FC), description, adapter FRU number, and provides a link to more details for each adapter.
  • Page 50 Broadcom (LSI) 9305-16E SAS3 HBA PCIe3.0 x8 LP; Adapter part number: 01EM701 (AOC- SAS3-9305-16E) EKSQ Samsung PM1725a NVMe 1.6 TB 5DWPD PCIe3.0 x8 LP Adapter; Adapter part number: 01EM677 (HDS-AVT-MZPLL1T6HEHP003) 36 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 51 Table 9. PCIe adapters supported in the 9006-22P system (continued) Feature code Description EKSR Samsung PM1725a NVMe 3.2 TB 5DWPD PCIe3.0 x8 LP Adapter; Adapter part number: 01EM678 (HDS-AVT-MZPLL3T2HMLS003) PCIe3 x4 Intel x550 10GBase-T Converged Network Adapter with Dual RJ45 Ports (FC EKA0) Learn about the specifications and operating system requirements for feature code (FC) EKA0 adapters.
  • Page 52 • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). • For more information, see the Linux Alert website (www14.software.ibm.com/webapp/set2/sas/f/ lopdiags/info/LinuxAlerts.html).
  • Page 53 I/O bus architecture PCIe3 x8. Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) Voltage 3.3 V, 12 V.
  • Page 54 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 55 I/O bus architecture PCIe2 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) Voltage 3.3V, 12 V.
  • Page 56 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 57 I/O bus architecture PCIe2 x4. Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita). Voltage 3.3 V, 12 V.
  • Page 58 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 59 I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita). Voltage 3.3 V, 12 V.
  • Page 60 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 61 I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) Voltage 3.3 V, 12 V.
  • Page 62 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 63 I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) Voltage 3.3 V, 12 V.
  • Page 64 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 65 FC EKEG: 01EM639 (AOC-K-SLG3-4E2PB-IB001) (Designed to comply with RoHS requirement) I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ Installing and configuring your system and system features 51...
  • Page 66 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 67 FC EKEH: 01EM637 (AOC-K-9361-8I2B-IB001) (Designed to comply with RoHS requirement) I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ Installing and configuring your system and system features 53...
  • Page 68 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 69 PCIe3 x16 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) Installing and configuring your system and system features 55...
  • Page 70 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 71 PCIe3 x16 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita). Installing and configuring your system and system features 57...
  • Page 72 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 73 PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) Installing and configuring your system and system features 59...
  • Page 74 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 75 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 76 01EM688 (AOC-MCX4121A-ACAT-IB001) (Designed to comply with RoHS requirement) I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ 62 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 77 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 78 For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) 64 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 79 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 80 For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) 66 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 81 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 82 For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita). Voltage 3.3 V, 12 V. 68 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 83 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 84 3.3 V, 12 V. Form factor Short, low-profile. Attributes provided Port-independent auto-negotiation. Supports MegaRAID Storage Manager software. Supports 3.0, 6.0 and 12 Gb/s SAS and SATA data transfer rates. 70 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 85 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 86 For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita). Voltage 3.3 V, 12 V. 72 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 87 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 88 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 89 PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) Installing and configuring your system and system features 75...
  • Page 90 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 91 PCIe3 x8. Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) Installing and configuring your system and system features 77...
  • Page 92 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 93 01EM698 (AOC-BCM5719-4P-BRC) (Designed to comply with RoHS requirement) I/O bus architecture PCIe x4. Slot requirement For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ Installing and configuring your system and system features 79...
  • Page 94 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 95 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 96 To check for operating system and partition requirements, see one of the following links: • The latest version of enabling libraries and utilities can be downloaded from Fix Central (http:// www.ibm.com/support/fixcentral/). 82 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 97 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 98 For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita). Voltage 3.3 V, 12 V. 84 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 99 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 100 For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) Voltage 3.3 V, 12 V. 86 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 101 • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 102 For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P (http://www.ibm.com/support/knowledgecenter/POWER9/p9eip/ p9eip12p_pcie_slot_details.dita) or PCIe adapter placement rules for the 9006-22P (http:// www.ibm.com/support/knowledgecenter/POWER9/p9eip/p9eip22p_pcie_slot_details.dita) Voltage 3.3 V, 12 V. 88 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 103: Installing A Pcie Adapter In The 9006-22P System

    • IBM Prerequisite website (www14.software.ibm.com/support/customercare/iprt/home). • IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). • The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
  • Page 104 Remove the screw and the tail-stock filler for that position. e) If you are inserting a storage drive adapter, connect the signal cables to the adapter before inserting the adapter. 90 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 105 See “Drive installation options for the 9006-22P system” on page 9 for cabling information. f) Insert the PCIe adapter (A) in position 1 of the PCIe adapter riser (B) as shown in Figure 54 on page Figure 54. Inserting an adapter into position 1 of the PCIe riser g) Replace the screw to secure the tail-stock.
  • Page 106 4. To install an adapter in position 4, complete the following steps: a) Retract the retaining pin and slide the retaining door open to release the tail-stock as shown in Figure 57 on page 93. 92 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 107 Figure 57. Releasing the tail-stock b) Remove the tail-stock filler. c) If you are inserting a storage drive adapter, connect the signal cables to the adapter before inserting the adapter. See “Drive installation options for the 9006-22P system” on page 9 for cabling information. d) Insert the adapter into the riser.
  • Page 108 Figure 58. Sliding the tail-stock retainer to the closed position 5. To install an adapter in position 3, 5, or 6, remove the riser as shown in Figure 59 on page 95. 94 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 109 Figure 59. Removing the PCIe riser a) Remove the screw (A) and retract the retaining pin (B). b) Lift the PCIe riser from the system. c) Place the PCIe adapter riser on an ESD surface. d) Remove the screw and the tail-stock filler for that position. e) If you are inserting a storage drive adapter, connect the signal cables to the adapter before inserting the adapter.
  • Page 110 2) Insert the riser, using the slots and alignment pins (A) to properly insert the riser. Push the riser firmly into the system backplane. 3) Set the retaining pin (B) to secure the riser. 4) Replace screw (C) in the side of the system. 96 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 111 Figure 61. Inserting the PCIe adapter riser 6. Using your labels, replace any cables and plugs that you removed from the PCIe adapters. Installing and configuring your system and system features 97...
  • Page 112 98 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 113: Common Procedures For Servicing Or Installing Features In The 5104-22C, 9006-22C, Or 9006-22P System

    Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a shock hazard: • If IBM supplied the power cord(s), connect power to this unit only with the IBM provided power cord. Do not use the IBM provided power cord for any other product.
  • Page 114 – For racks with a DC power distribution panel (PDP), turn off the circuit breaker that controls the power to the system unit(s), or disconnect the customer’s DC power source, when directed to disconnect power during servicing. 100 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 115 • If you are installing a feature, contact one of the following service organizations: – The provider of your parts or next level of support. Common procedures for servicing or installing features in the 5104-22C, 9006-22C, or 9006-22P system 101...
  • Page 116: Identifying The 5104-22C, 9006-12P, 9006-22C, Or 9006-22P System That Contains The Part To Replace

    7. If you encounter difficulties during the installation, contact your service provider, your IBM reseller, or your next level of support. 8. For thermal performance, ensure that the top cover is on when the system is running.
  • Page 117 LEDs are also on the rear of the system; see Figure 63 on page 104. The identify LED is at (2). Turn it on by using a system identify command. Common procedures for servicing or installing features in the 5104-22C, 9006-22C, or 9006-22P system 103...
  • Page 118: Identifying The 5104-22C, 9006-12P, 9006-22C, Or 9006-22P That Needs Servicing

    For in-band networks, enter the following chassis identify command: ipmitool -I <interface> chassis identify <interval> interface The interface that you are using to connect to the system. For example, usb. 104 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 119: Preparing The System To Remove And Replace Internal Parts

    2. Identify the part and the system that you will be working on. For instructions, see “Identifying the 5104-22C, 9006-12P, 9006-22C, or 9006-22P system that contains the part to replace” on page 102. 3. Attach the electrostatic discharge (ESD) wrist strap.
  • Page 120 106 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 121: Preparing The System For Operation

    CAUTION: Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in splattered metal, burns, or both. (L005) 6. Place the system into the service position. For instructions, see “Placing an 5104-22C, 9006-22C, or 9006-22P system into the service position” on page 117.
  • Page 122: Starting And Stopping The System

    3. Place the system into the operating position. For instructions, see “Placing an 5104-22C, 9006-22C, or 9006-22P system into the operating position” on page 118. (L012) CAUTION: Pinch hazard. (L012) 4. Reconnect the power cords to the system. For instructions, see “Connecting the power cords to an 5104-22C, 9006-22C, or 9006-22P system”...
  • Page 123 Figure 64. Power switch for 9006-12P Common procedures for servicing or installing features in the 5104-22C, 9006-22C, or 9006-22P system 109...
  • Page 124: Stopping The 5104-22C, 9006-12P, 9006-22C, Or 9006-22P System

    -P +10 "Repairs coming" The -P setting instructs the system to shut down and then power down. The + indicates the time in minutes before the shutdown occurs. 110 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 125: Drive Commands For 5104-22C, 9006-12P, 9006-22C, Or 9006-22P

    Drive commands for 5104-22C, 9006-12P, 9006-22C, or 9006-22P Learn about the storage drive commands for the IBM Power System LC921 (9006-12P) or IBM Power System LC922 (9006-22P) systems. arcconf commands Learn about the arcconf commands. They are for SATA drives and drive on modules (DOMs) that are directly connected to the system backplane without using a PCIe adapter.
  • Page 126 To change the settings of the adapter to support the self-encrypting drive (SED) function: storcli64 /c0 set personality behavior securesed=off/on To check the firmware level of the MegaRAID adapter: storcli64 /c0 show all|egrep "Bios Version|Firmware Package|Firmware Version" 112 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 127: Sas3Ircu Commands

    If the nvme command is not installed, download the utility from NVMe management command line interface (github.com/linux-nvme/nvme-cli). Follow the installation instructions available on that site. Common procedures for servicing or installing features in the 5104-22C, 9006-22C, or 9006-22P system 113...
  • Page 128: Sensor Readings Gui Display

    • Critical threshold exceeded (an event requires a service action) • Service action required for hard fail • Partial function failure that reached a "service action required" state 114 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 129: Removing And Replacing Covers

    Removing and replacing covers on an 5104-22C, 9006-22C, or 9006-22P system Learn how to remove and replace the covers for an 5104-22C or 9006-22C system so that you can access the hardware parts or service the system. Removing the service access cover from an 5104-22C, 9006-22C, or 9006-22P system Learn how to remove the service access cover from an 5104-22C or 9006-22C system.
  • Page 130: Installing The Service Access Cover

    4. Lift up the front of the cover up and remove it from the system. Installing the service access cover on an 5104-22C, 9006-22C, or 9006-22P system Learn how to install the service access cover on a rack-mounted 5104-22C or 9006-22C system. About this task Attention: For safety, airflow purposes and thermal performance, the service access cover must be installed and fully seated before you power on the system.
  • Page 131: Service And Operating Positions

    • When the rails are fully extended, the rail safety latches lock into place. This action prevents the system from being pulled out too far. Common procedures for servicing or installing features in the 5104-22C, 9006-22C, or 9006-22P system 117...
  • Page 132: Placing An 5104-22C, 9006-22C, Or 9006-22P System Into The Operating Position

    Ensure that the cables and cable management arm move freely, and that they do not catch on anything. Placing an 5104-22C, 9006-22C, or 9006-22P system into the operating position To place a system into the operating position, complete the steps in this procedure.
  • Page 133: Power Cords For The 5104-22C, 9006-22C, Or 9006-22P System

    1. Identify the system unit that you are servicing in the rack. 2. Label and disconnect the power cords from the system unit as shown in Figure 70 on page 120. Common procedures for servicing or installing features in the 5104-22C, 9006-22C, or 9006-22P system 119...
  • Page 134: Connecting The Power Cords

    Figure 70. Removing the power cords from the system Connecting the power cords to an 5104-22C, 9006-22C, or 9006-22P system To connect the power cords to a system, complete the steps in this procedure. Procedure Using your labels, reconnect the power cords to the system unit as shown in Figure 71 on page 121.
  • Page 135 Figure 71. Connecting the power cords to the system Common procedures for servicing or installing features in the 5104-22C, 9006-22C, or 9006-22P system 121...
  • Page 136 122 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
  • Page 137: Notices

    Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead.
  • Page 138: Accessibility Features For Ibm Power Systems Servers

    This product uses standard navigation keys. Interface information The IBM Power Systems servers user interfaces do not have content that flashes 2 - 55 times per second. The IBM Power Systems servers web user interface relies on cascading style sheets to render content properly and to provide a usable experience.
  • Page 139: Privacy Policy Considerations

    Contact the vendor for accessibility information about its products. Related accessibility information In addition to standard IBM help desk and support websites, IBM has a TTY telephone service for use by deaf or hard of hearing customers to access sales and support services:...
  • Page 140: Electronic Emission Notices

    Class A Notices The following Class A statements apply to the IBM servers that contain the POWER9 processor and its features unless designated as electromagnetic compatibility (EMC) Class B in the feature information.
  • Page 141 This is a Class A product based on the standard of the VCCI Council. If this equipment is used in a domestic environment, radio interference may occur, in which case, the user may be required to take corrective actions. Japan Electronics and Information Technology Industries Association Statement This statement explains the Japan JIS C 61000-3-2 product wattage compliance.
  • Page 142 Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung von IBM verändert bzw.
  • Page 143: Class B Notices

    Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM-authorized dealers. IBM is not responsible for any radio or television interference caused by unauthorized changes or modifications to this equipment.
  • Page 144 This product is in conformity with the protection requirements of EU Council Directive 2014/30/EU on the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non- recommended modification of the product, including the fitting of non-IBM option cards.
  • Page 145 Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung von IBM verändert bzw.
  • Page 146: Terms And Conditions

    Permissions for the use of these publications are granted subject to the following terms and conditions. Applicability: These terms and conditions are in addition to any terms of use for the IBM website. Personal Use: You may reproduce these publications for your personal, noncommercial use provided that all proprietary notices are preserved.
  • Page 148 IBM®...

This manual is also suitable for:

5104-22c9006-22p