Leds; Fixed Interface Attributes - H3C SecPath V100-E Installation Manual

Double data rate synchronous dynamic random access memory (DDR SDRAM) stores the data
exchanged between the system and the CPU.
Flash memory functions as the major file storage medium to store application files, anomaly
information, and configuration files.
Boot ROM stores the boot file for device startup.

LEDs

Table 1-2 LEDs on the V100-E
LED
PWR0
PWR1
SYS
ACT (system)
LINK
ACT (interface)

Fixed Interface Attributes

Console port (CONSOLE)
Table 1-3 Attributes of the console port
Item
Connector
Interface standard
Baud rate
Services
OFF means the PSU0 is not supplying power to the device.
ON means the PSU0 is supplying power to the device.
OFF means the PSU1 is not supplying power to the device.
ON means the PSU1 is supplying power to the device.
ON means the system is operating normally.
OFF means the system is operating abnormally.
Blinking means the software is operating normally.
OFF means the software is operating abnormally.
OFF means no link is present.
ON means a link is present.
OFF means no packets are being transmitted or received on the interface.
Blinking means packets are being transmitted or received on the interface.
RJ-45
RS-232
1,200 bps to 115,200 bps, defaults to 9,600 bps
Connected to an ASCII terminal
Connected to the serial interface of a local PC running terminal
emulation software
Command line interface (CLI)
Description
Description
1-3