Starting And Configuring The V100; Booting; Setting Up A Configuration Environment - H3C SecPath V100-E Installation Manual

4
Starting and Configuring the V100-E

Booting

For the initial use of the V100-E, you can only make CLI configuration through the console port.

Setting Up a Configuration Environment

Connecting a console terminal to the V100-E
Connect the RJ-45 connector of the console cable to the console port on the V100-E and the DB-9
connector to the serial interface on the PC (see Figure 4-1).
Figure 4-1 Local configuration through the console port
Setting terminal parameters
Step1 Start the PC (or the console terminal), run on the PC the emulation (the Terminal on Windows 3.1, or the
HyperTerminal on Windows 9X/Windows 2000/Windows XP for example) and create a new connection.
Enter the name of the new connection in the Name field and click OK. See Figure 4-2.
Figure 4-2 Create a new connection
4-1