Mims - H3C SecPath V100-E Installation Manual

AUX port (AUX)
Table 1-4 Attributes of the AUX port
Item
Connector
Interface standard
Baud rate
Services
Ethernet interfaces
The V100-E provides four fixed 10/100 Mbps autosensing Ethernet interfaces. Their attributes are
described in Table 1-5.
Table 1-5 Attributes of the Ethernet interfaces
Item
Connector type
Interface type
Frame formats
Operating mode

MIMs

The V100-E provides one expansion slot for the following MIMs:
1-port 10Base-T/100Base-TX fast Ethernet interface module (1FE)
2-port 10Base-T/100Base-TX fast Ethernet interface module (2FE)
4-port 10Base-T/100Base-TX fast Ethernet interface module (4FE)
1-port 10Base-T/100Base-TX/1000Base-T Ethernet interface module (1GBE)
2-port 10Base-T/100Base-TX/1000Base-T Ethernet interface module (2GBE)
1-port 1000Base-LX/1000Base-SX Ethernet optical interface module (1GEF)
2-port 1000Base-LX/1000Base-SX Ethernet optical interface module (2GEF)
High performance network data encryption module (HNDE)
For details about these MIMs, refer to MIM Modules .
RJ-45
RS-232
1,200 bps to 115,200 bps
Modem dialup
Backup
RJ-45
MDI/MDIX autosensing
Ethernet_II
Ethernet_SNAP
10/100 Mbps autosensing
Half/full duplex
1-4
Description
Description