Panel And Interface Leds; Interface Cable - H3C SecPath V100-E Installation Manual

Panel and Interface LEDs

Figure 8-6 shows the 1FE module panel.
Figure 8-6 1FE module panel
Figure 8-7 shows the 2FE module panel.
Figure 8-7 2FE module panel
Figure 8-8 shows the 2FE module panel.
Figure 8-8 4FE module panel
Table 8-2 describes the LEDs on the 1FE/2FE/4FE module panel and how to read their state.
Table 8-2 LEDs on the 1FE/2FE/4FE module
LED
LINK
ACTIVE/ACT

Interface Cable

Ethernet cable
The FE modules use category-5 twisted-pair cables with RJ-45 connectors (see Figure 8-9). Pins 1 and
2 of the connectors are for transmitting data, and Pins 3 and 6 are for receiving data.
Figure 8-9 Ethernet cable
10/100BASE-TX
0
OFF means no link is present; ON means a link is present.
OFF means no packets are being transmitted or received on the interface;
blinking means packets are being transmitted/received on the interface.
1
Description
8-5