Interface Attributes - H3C SecPath V100-E Installation Manual

Figure 8-4 2FE module
Appearance of the 4FE module
Figure 8-5 shows the 4FE module.
Figure 8-5 4FE module

Interface Attributes

Table 8-1 shows the interface attributes of the 1FE, 2FE and 4FE modules.
Table 8-1 Interface attributes of the 1FE, 2FE and 4FE modules
Attribute
Connector
Number of connectors
Cable type
Operating mode
Frame format
1FE module
RJ-45
1
Ethernet cable
Full/half duplex
10/100 Mbps autosensing
Ethernet_II
Ethernet_SNAP
8-4
2FE module
2
4FE module
4