Uploading/Downloading Applications/Files Using Ftp - H3C SecPath V100-E Installation Manual

TFTP download completed, Packet length 8790321 bytes.
System file length 7868992 bytes, http.zip file length 921329 bytes.
Writing file flash:/system to FLASH...
Please wait, it may take a long time
####################################################################
Writing into Flash Succeeds.
Writing file flash:/http.zip to FLASH...
Please wait, it may take a long time
################################################################################
#########
Writing into Flash Succeeds.

Uploading/Downloading Applications/Files Using FTP

The H3C SecPath series security gateway offers FTP server function, which provides you another way
of updating configuration files, and upgrading application and Boot ROM program. You only need to
connect a FTP client, local or remote, to the V100-E. When you pass the authentication, you can upload
and download configuration files or applications.
Upload: Transfer files from PCs running FTP client to the V100-E, namely the put operation.
Download: Transfer files from the V100-E to PCs running FTP client, namely the get operation.
Setting up upload/download environment
Setting up the local upload/download environment
Figure 5-3 Set up the local upload/download environment
Step1 Connect the PC to the Ethernet port of the V100-E.
Step2 Configure the IP address of the Ethernet port of the V100-E. Here suppose it is 10.110.10.10.
Step3 Configure the IP address of the PC. Here suppose it is 10.110.10.13.
5-7