3
LEDs
Chassis LEDs
Figure 3-1 Chassis LEDs
(1) 10GBASE-R-SFP+ Ethernet fiber port LEDs 6 through 19
(2) 10/100/1000BASE-T Ethernet copper port LEDs 20 through 31
(3) Power button/LED
(5) System alarm LED (ALM)
(7) Storage controller status LED (RAID)
(8) 10GBASE-R-SFP+ Ethernet fiber port LEDs 4 and 5
(9) 10GBASE-R-SFP+ Ethernet fiber port LEDs 0 through 3
(10) Management Ethernet copper port LED (MGMT)
Table 3-1 Chassis LED description
LED
10GBASE-R-SFP+ 0 to 3
10GBASE-R-SFP+ 4
through 19
10/100/1000BASE-T 20
through 31
Status
Steady green
Flashing green (3 Hz)
Off
Steady green
Flashing green (3 Hz)
Steady yellow
Flashing yellow (3 Hz)
Off
Steady green
Flashing green (3 Hz)
Steady yellow
Flashing yellow (3 Hz)
3-1
(4) Running status LED (RUN)
(6) IRF LED (reserved)
Description
A 10 Gbps link is present on the port.
The port is sending or receiving data at 10 Gbps.
No link is present on the port.
A 10 Gbps link is present on the port.
The port is sending or receiving data at 10 Gbps.
A 1000 Mbps link is present on the port.
The port is sending or receiving data at 1000 Mbps.
No link is present on the port.
A 1000 Mbps link is present on the port.
The port is sending or receiving data at 1000 Mbps.
A 10/100 Mbps link is present on the port.
The port is sending or receiving data at 10/100