Ethernet Cable - H3C SecPath V100-E Installation Manual

About This Manual
Organization
H3C SecPath V100-E Security Gateway Installation Manual is organized as follows:
1 Product Overview
2 Installation Preparations
3 Installing the V100-E
4 Starting and Configuring the V100-E
5 Maintaining Software
6 Maintaining Hardware
7 Troubleshooting
8 MIM Modules
Appendix Compliance and Safety Manual
Conventions
The manual uses the following conventions:
Command conventions
Convention
Boldface
italic
[ ]
{ x | y | ... }
[ x | y | ... ]
Chapter
The keywords of a command line are in Boldface.
Command arguments are in italic.
Items (keywords or arguments) in square brackets [ ] are optional.
Alternative items are grouped in braces and separated by vertical bars.
One is selected.
Optional alternative items are grouped in square brackets and
separated by vertical bars. One or none is selected.
Contents
Introduces the features and applications of the
V100-E and provides the appearance and
system specifications of the V100-E.
Introduces the environment requirements for
installing the V100-E, installation precautions
and installation tools.
Introduces how to install the V100-E and how to
connect the power cable, console cable and

Ethernet cable.

Introduces the startup and configuration of the
V100-E, including device boot and powering up
and system file initialization.
Introduces software maintenance of the V100-E,
including software upgrade and configuration file
loading.
Introduces hardware
V100-E, including replacing a DDR SDRAM.
Introduces the faults that may occur during the
installation and startup of the V100-E and the
corresponding solutions.
Introduces the appearance, panel and LEDs of
the MIMs, and describes how to install the MIMs
and how to connect the interface cables.
This section introduces part of the safety
precautions that should be followed during the
installation and maintenance of the equipment.
Description
maintenance of the