Figure 5-1 The Send File Dialog Box; Figure 5-2 The Sending File Interface - H3C SecPath V100-S Installation Manual

Installation Manual
H3C SecPath V100-S Security Gateway
Note:
The new baud rate takes effect only after you disconnect and reconnect the terminal
emulation program.
Step 4: Select [Transmit/Send File] in the terminal window. The following dialog box
pops up:

Figure 5-1 The Send File dialog box

Step 5: Click <Browse>, select the application file to be downloaded, set protocol to
XModem, and click <Send>. The following interface pops up:

Figure 5-2 The Sending File interface

Step 6: After completing the downloading, the system begins writing data to the Flash
memory and then displays the following information in the terminal window, indicating
the completion of the downloading:
Download completed.
Writing to flash memory...
Chapter 5 Software Maintenance
5-4