Installation Manual
H3C VG 10-40/10-41 Voice Gateway
Downloading ... CCCCC
Note:
After the baud rate at the console terminal is set, the new setting can
become valid only if the terminal emulation program is disconnected
and reconnected for at least once.
Step 4: Select [Transmit/send file] in the terminal window and the
following dialog box will pop up:
Figure 5-1 Send File dialog box
Step 5: Click on <Browse>, select the application file to be
downloaded, and set the protocol to XModem. Then click on <Send>,
and the following interface will pop up:
Chapter 5 Software Maintenance
5-5