Table of Contents
Advertisement
Figure 3 Wrapping the PVC insulation tape
d. Installation engineer C pulls the lifting sling downwards, and installation engineer B pulls
the other end of the lifting sling outwards to protect the power cables from colliding with
the tower.
2. Secure the power cables to the tower vertically using cable clips.
3. Remove the cable ties, PVC insulation tape, and lifting sling.
NOTE:
The procedure for hoisting the power cables onto the tower is for your reference only.
Parent Topic:
Hoisting an RRU and Related Cables onto a Tower
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
< Previous topic
7.2.2.7 Installing the RRU
This chapter describes the procedure for installing the RRU. The procedure for installing the RRU
varies depending on installation options.
Mounting Kits for an RRU
This section describes the bracket assembly and the attachment plate for an RRU.
Installing the RRU on a Pole
One or more RRUs can be installed on a pole.
Installing an RRU on U-steel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RRU5909 and is the answer not in the manual?
Questions and answers