Huawei RP100 Quick Operation Manual

HUAWEI RP100&RP200 Room Presence
Quick Operation Guide
Tips
This guide describes
commonly used operations
for holding a video
conference. Please put it in
a place to best show it off.
Power On
1. Press
Power on or off the
endpoint
Select or control a camera
Increase / Decrease Zoom in / out
the volume
Switch between the local and
remote cameras
Go to the menu screen
Go back to the previous screen
or close the current screen
Scroll through the screen
or turn the camera Confirm the current selection
End a conference or
Place a call or
disconnect a site
initiate a conrefence
Start or stop presentation sharing
Mute or unmute
the microphone Switch between layouts
Enter letters, digits, and symbols
or select a camera preset
Enter dots used in Switch between text-entry methods
an IP address or display the virtual keyboard
Delete characters or a site
Display help
from a conference
information
Two-stage dialer
Q: What should I do if the remote control is unresponsive when I try to use it?
A: The maximum operating distance of the remote control is 6 meters.
The remote control performance may also be affected by bright light.
Point it at the infrared sensor on the camera.
Join a Conference
1. Press to access the conferencing
screen.
2. Press the left or right arrow keys to
access the Conference Schedules
2
screen.
1
3. Select an ongoing conference.
4. Press or .
An ongoing conference is indicated by
1
Create a Conference
for 2s.
1. Press to access the conferencing
screen.
2. Enter the site name, IP address,
or number.
3
1
3. Press or
Q: How can I create a multi-party conference?
A: On the conferencing screen, press the left or right
arrow keys to access the Conference Schedules
screen. Then select Create Conference and press
Manage Conference Layouts
1. Press to switch to view sites
only, view presentation only, or
view a combination of sites and
presentation.
.
2
Start Presentation
1. Connect to a presentation source.
Using cables:
Connect the audio and video output ports on the computer
to the audio and video input ports on the system.
Using the Air Content Sharing client:
a. On the computer desktop, double-click
Sharing.
b. Locate the presentation source and double-click it.
Alternatively, the message An air content sharing source
device requests to connect to your endpoint. Accept? that
will be displayed on the remote controlled UI, select Accept
and press .
.
.
2. Press to start the presentation.
Q: How can I install the Air Content Sharing client?
A: On your computer, open a web browser and enter the RP IP
address in the address bar, then press Enter. Click Download Air
Content Sharing in the upper left corner to download the Air Content
Sharing client. Then install it as prompted.
Air Content
3