Program Control - Hanyoung TH500 Manual

7.4.4 Start Auto Tuning
Although it starts fix control operation according to usersí setting value, if you do not perform Auto
Tuning, P.I.D control will be applied in accordance with its initial value at the delivery of goods.
Therefore it will be better to perform Auto Tuning in order to get good control performance. To start
Auto Tuning, press Auto Tuning button at the bottom of picture [Fig.136]. When T.AT button
flickering, it shows that Auto Tuning is being performed. After Auto Tuning finished, Auto Tuning
values will be set up automatically and it stops flickering. Same as temperature Auto Tuning ,
perform auto tuning of humidity by pressing button.
7.5 Programable Control
7.5.1 Selection of Program Control
Firstly select operation method as a program control in order to perform program control. Press
button under the status of operation screen and move to function setting main screen. After pressing
button, it moves to function setup 1 screen. On this screen, press button and
select program control.
[FIG.137] Function setup 1
7.5.2 Program Pattern Setting
Press button in the program setting menu screen, it displays program setup screen
[Fig. 138]. Under this screen, select number 1 pattern by pressing pattern number setting window.
Press window of temp.setting value, humidity setting value, operating time and then set up relevant
segments.
88