Hanyoung TH500 Manual page 51

Pattern alarm setting [FIG 59] screen is the setting screen that sets the alarm 1~4 which will be used within the
pattern. The alarm value which was set within this screen can select the pattern alarm 1~4 of each segment.
Alarm type is same as the [Table 2] alarm type and code. Also, in order to input the target alarm code after
selecting the temperature and humidity, press the code display unit then alarm code setting [FIG 60] screen will
be displayed.
Display the target alarm code by pressing the
input the alarm code to the pattern alarm setting [FIG 59] screen code automatically. If users want to cancel the
set alarm code, press the
then set alarm code will be cancelled.
⦁ [Table2] Alarm Type & Code
Code Code
Alarm Type
Upper limit
1
absolute
(Tangent)
Lower limit
absolute
2
(Tangent)
Upper limit
3 deviation
(Tangent)
Lower limit
4 deviation
(Tangent)
Upper limit
5 deviation
(Reciprocal)
Lower limit
deviation
6
(Reciprocal)
Upper & lower
7
limit deviation
Within the range of
8
upper & lower
limit deviations
Upper limit
absolute
9
(Reciprocal)
Lower limit
absolute
10
(Reciprocal)
△ : SV ▲ : Alarm SV
button (located on the right middle side of alarm code setting [FIG 60] screen)
Alarm Type
Upper limit
11
absolute
(Tangent, Hold)
Lower limit
12
absolute
(Tangent, Hold)
Upper limit
13 deviation
(Tangent, Hold)
Lower limit
deviation
14
(Tangent, Hold)
Upper limit
deviation
15
(Reciprocal, Hold)
Lower limit
deviation
16
(Reciprocal, Hold)
Upper & lower
limit deviation
17
(Hold)
Within the range of
upper & lower limit
18
deviations (Hold)
Upper limit
absolute
19
(Reciprocal, Hold)
Lower limit
absolute
20
(Reciprocal, Hold)
, button. After that, pressing the indicated screen will
Operation View
52