Hanyoung TH500 Manual page 31

3.5 Running of Program control
Program control is control a Process Value (PV) by change of Set Value (SV) according to
course of time.For example, it is increase the current temperature to 30 ℃ for 10 min. and
maintain the 30 ℃ for 15 min., and then increase to 70 ℃ again for 40 min. and maintain the
70 ℃ for 1 hour. Program control is especially using widely in the test equipment for
environment like as thermostat and electric furnace.
3.5.1 Selection of Program Control Running.
In order to running with program control, press the
stopped screen 1 for program control [Fig.16] and move to the screen for function setting
[Fig.17].
[Fig.16] Running stopped screen 1 for program control.
TH500
[FIG.17] Function setting menu
button of the top on the running
32
TH300