Fix Control - Hanyoung TH500 Manual

3.4 Running of Fix-control
Fix-control is running a temperature and humidity by fixed set value (SV).
3.4.1 Running selection of Fix-control 1.
[Fig.12] Running stopped screen 1 for Fix control
Operation start: [FIG.12] Input the temperature set value (temperature SV) and humidity set value
(humidity SV) within the fix control operation stop status screen and press the
button then the fix control operation will be started just like a [FIG.13]. Here,
upper right side will be changed to
with the red color.
Operation stop: Press the
("Stop the system control" will be displayed). Here, press
When selecting the fix control or program control, press the
operation stop [FIG12] screen then function setting screen will be displayed. Within this screen,
press the
the button will select the fix control. Set each of setting lists in the operation setting screen
2 by pressing the
While performing the fix control, changing the set value (SV) will automatically change the PID ZONE
applying number in accordance with the set value. If users want to use the specific PID zone,
please input the PID zone number after inputting the set value. During operation, if
button appear on the lower side of fix control operation screen, each of these refers to temperature
and humidity auto tuning button. Auto-tuning is operated only in the fix control operation mode and
it runs the auto-tuning by pressing the button after inputting the temperature and humidity set value.
In case where users need to stop the auto-tuning, please press the
(temperature side auto-tuning button) or
fix control button will
During auto-tuning, all of the computing values corresponding to the auto-tuning will not be saved
if users stop the auto-tuning while it is operating. Auto-tuning can be operated up to 24 hours and
elapsing the indicated hours will stop the auto-tuning.
and
button on the lower right side to stop the operation.
button to select the operation method of function setup 1 screen. Pressing
button.
the control operation and auto-tuning.
[Fig.13] Running screen 1 for Fix control
button on the lower right side will be displayed
to stop the operation
YES
button within the fix control
(humidity auto-tuning button). Obviously pressing the
30
button on the
and