Move to the screen for
button, and select the program control as running method with press the
button. After finish to setting for function setup 1 ~ 2 with press the
to "Function setting menu" screen with press the
,
3.5.2 Set of Program Control Pattern
Press the
pattern set [Fig.19]. Establish the set item for each segment of pattern in the screen for program
pattern set [Fig.19].
[Fig.18] Program Set Screen
Move to the running stopped screen 1 for program control after input for all, and input a start
segment No. in the pattern and program start pattern. And then, program control will be running if
you press the
button.
[Fig.20] Running stopped screen
1 for program control.
"Function setup 1"
, and move to the Program Set Screen [Fig.18]
button in the program set screen [Fig.18] and move to the screen for program
with press the
button. And then, finish the set for
[Fig.19] Pattern Set Screen
[Fig.21] Running screen 1 for
33
button, and move
program control