Error Indication - Hanyoung TH500 Manual

3.8 Error Indication

Running screen 2 for program control or fix control [Fifg.26] is indicating an operating state for running.
[Fig.26] Running screen 2 for fix control
The indication of errors through sensor disconnection and external D/I is displayed with
on and off in the running screen 2 for program control [Fig. 26]. If you press the
error occurrence screen will appear. In this case, the error indicator for temperature & humidity
disconnection will appear, while D/I(External contact input) no. 1 to 8 will be displayed on the bottom.
You can check it by pressing the
Press the button to show the operating record indication screen which can check the state of
RUNNING, STOP, Sensor Disconnection and External Contact Input (D/I).
When temperature or humidity sensor is disconnected, control operation
will be stopped after passing sensor disconnection waiting time which was
set in the SYSTEM SETTING.
[Fig.27] Indication screen for occurrence of error
, arrow button.
[Fig.28] Operating Rec
36
button
button, the