Input Related Setting - Hanyoung TH500 Manual

7 Simple Example
HANYOUNG NUX is Temperature Humidity Controller (Model: TH500 / 300) is consisted of Operation screen,
Operation Setting screen, System Setting screen. You can select structural elements in the System Setting.
System installation company such as environment test chamber manufacturer etc already finished the system
setting when they taking itís product out of warehouse. So users do not have to do system setting additionally.
Users can set up humidity-temperature simply through Operation Setting.

7.1 Input related setting

[FIG.124] Sensor Input Setting 1
7.1.1 Sensor Input Setting
Setting item
Set up according to input sensor type. If sensor type is a dry or web bulb
respectively and
Sensor
humidity sensor (Our Model EE99), you should set up temperature sensor
Type
as
※ Select humidity sensor type as OFF in case it needs temperature control only.
Limit the input range of sensor. Generally, it is fine with using the initial value but, input range of temperature is
-100 ~ 200 (TH500), -100 ~ 500 (TH300) and input range of humidity is in % RH.
Input
If you are using the electric humidity sensor (model EE99), set up the input range to (1-5)V and connect
Range
metallic film resistor (250 ohms 1% less) to both ends of desktop humidity sensor input terminal
When selecting V d.c, set up suitable scale. In case of 1-5 V input and display range:
VDC
Scaling
0 ~ 100, set up scaling setting as 0 ~ 100.
When touching
Temp. ADJ.
displayed.
Low Pass Filter selects suitable time when processed value is chattering
Filter Time
due to inflowing of noise through input sensor line.
type, select RTD. If you use electronic
and humidity sensor as
in the [Fig.124,Fig.125]. [Fig.79] & [Fig.80] will be
[FIG.125] Sensor Input Setting 2
Explanation
82