Operation Setting - Hanyoung TH500 Manual

5.1 Operation setting

5.1.1 Function setup 1
Pushing
up each setting item of the function setup 1. Choose between Select Program control and Fixed
control in selecting Working method.
PROGRAM
RUN MODE
Set it up as the gradient of temperature variations [℃/m] per hour (minute) from
T.SV RATE
current temperature to setting temperature in fixed control.
Set it up as the gradient of temperature variations [℃/m] per hour (minute) from
H.SV RATE
current temperature to setting temperature in fixed control.
Fix RUN TIME
After executing the fixed-mode control for the time entered, the operation will stop automatically.
ZN. TRACKING It prevents rapid output change when P.I.D ZONE is changed.
5.1.2 Function setup 2
After finishing the setting of Function setup 1, press
In case outage occurs in working, it will be different with Operation condition in recovering outage by selecting
BOOT RUN of Function setup 2 screen. (only the power recovers within five seconds after outage, the same
condition as before will be kept up.
button in [Fig.40]Function setting menu screen, you should select or set
[Fig.41] Function setup 1 screen
Select in program control
FIX RUN Select in fixed control
[Fig.42] Function setup 2 screen
button to set up the setting item of Function setup 2.
41