Hanyoung TH500 Manual page 44

[Fig.49] Program Pattern Setting screen 1
Time Signal Setting Mode is divided into 2 types according to mode : SEG On/Off Mode and Time
Setting Mode. Time Signal can be set to 8 points per each Segment.
[Fig.51] Time Signal Setting
Setting Mode
SEG On/Off Mode
ON
TIME
Delay
(Time Setting
ON Time
Mode)
⦁ Time signal segment ON/OFF setting method
[Fig.53] shows an example of using the T/S in ON/OFF mode. It performs turning on and off the T/S in
the desired segment with the name of ON/OFF mode. The ON and OFF buttons are composed
separately like [Fig.51]. Select by pressing
Operation.
⇦ ➡
Set the Time Signal in ON, while segment is operating
Set the Time Signal in ON, after setting time is delayed
from the beginning of segment.
Set the Time Signal in ON, during setting time
from segment in ON.
or
[Fig.50] Program Pattern Setting screen 2
[Fig.52] Example of Time Signal Setting
Function
button, according to the desired Time Signal
45
Setting Range
Each segment
99 hour 59 min
99 hour 59 min