Hanyoung TH500 Manual page 74

6.6.2 D.I Setting 2
It is possible for user to use each D.I name or Error name directly by using the combination of
KOR/ENG/NUM/SIGN. When touching D.I name screen( mark), number input keypad will
be shown up. By using keyboard change button, set the name per each D.I number.
The name which is set in D.I setting 2 will be displayed in the operation history screen in case
it makes an error through D.I.
[Fig.110] D.I Setting 2
6.6.3 D.I Setting 3
It is a common case that D.I has external error input. Therefore sometimes it is necessary to
stop system control not by RUN/STOP but by D.I. In D.I Setting 3 [Fig.111], it is possible to set
System Stop against the remaining D.I numbers except D.I numbers allocated to operation
function (RUN/STOP, STEP, HOLD). D.I number When touching button, Waiting Time Input
screen will be activated. When selecting Waiting Delay time, system will be finished after
passing waiting delay time.
TH500 TH300
[Fig. 111] D.I Setting 3
75