Hanyoung TH500 Manual page 43

⦁ Setting each input item of [Fig.45] in reference of the diagram below.
Name
Enter the pattern number [
PTN NO.
the
SEG.Page
Pressing the
TEMP. SV
Pressing the setting window, set Temperature SV of segment.
HUMI. SV
Pressing the setting window, set Humidity SV of segment.
Hour/Min
Setting operation time of segment.
Selecting waiting operation function set in waiting operation setting display.
Wait
T.S.(Time Signal) Selecting valid time signal in segment.
Selecting each action among 4 kinds of signal esigned in pattern signal
ALARM
setting display.[Fig.47]Pattern signal selection screen
⦁ SEG. Insert/Delete
Pressing SEG number in the left side of [Fig.46], it is shown in red to segment moved & selected into
SEG. Insert/Delete display.
SEG. Page button is changed into
be inserted or deleted and then the next Segment will be moved.
⦁ Waiting/Pattern signal selection
Select Waiting, Pattern signal item of Program pattern
setting display to execute contents set in Waiting
Operation Setting display & Pattern Alarm Setting
display (If you press
setting display, Waiting Operation Setting display will
be indicated.)
5.2.2 Time Signal Setting
[Fig49] and [Fig50] screen will be displayed alternately when touching
Program Pattern Setting screen [Fig. 49] . Allocated Time Signal will be shown as blue color.
When touching T/S button (
number on the Program Pattern Setting 2 screen [Fig. 50] , Time Signal Setting screen [Fig.51]
will be displayed.
Function
/ button.
/ button, it moves each 4 segment.
,
button in Program
) on the Program Pattern Setting screen [Fig. 49] or Time Signal
] to set or select it by pressing
button in that time. Pressing this button, Segment should
[Fig.48]Pattern Alarm selecting screen
44
Range
1 ~ 100 Pattern
-100~200 ℃ TH500
-100~500 ℃ TH300
0.0 ~ 100.0 %
0 hour ~ 255 hour 59 minute
ON/OFF
1 ~ 4 each
ON/OFF
button in the