How To Install - Hanyoung TH500 Manual

2 Installation method
This is information for installation place and method of TH300/TH500 temperature and humidity
program controller. So please ready it before installation.

2.1 How to install

(1) Use the sheet plate with thickness 1 ㎜ ~ 10 ㎜ for panel
(2) Push in the temperature/humidity controller starting at the front panel
(3) Mount the product by using the fixing bracket just like an image below.
(4) Tightening it too strongly may damage the fixing bracket or change the shape of case
when mounting it to the panel by using the fixing bracket.
■TH500
Panel
Insertion direction
•To prevent electric shock, please check "turn off power"
•Before turn on power, please connect over the third class grounding.
•During retransmission, it may cause electric shock so please do
not touch terminal.
• Please wire it after turn off main power
• Please contact around 2A fuse to main electronic power line.
Fixing bracket
Thickness of
panel : 1 ~ 10 ㎜
■TH300
Insertion direction
9
Panel
Fixing bracket
Fixing bracket
Thickness of
panel : 1 ~ 10 ㎜