Table of Contents
Advertisement
Step
5
6
7
8
9
®
Avaya CallPilot
201i Server Hardware Installation
NTRH1408 and NTRH1410. See
for Meridian 1
on page 51.
• For Option 11C, you require two cables to complete the
connection between the 201i server and the SCSI device:
NTRH1407 and NTRH3502. See
SCSI cable for Option 11C
• For Option 11C Mini or Communication Server 1000, you
require one cable to complete the connection between the
201i server and the SCSI device: the NTRH3502 cable that is
provided in the CD-ROM and tape drive kits. See the
following:
- Option 11C Mini:
Installing the NTRH3502 SCSI cable for
Option 11C Mini
on page 65
- Communication Server 1000:
SCSI cable for Communication Server 1000
Set the DIP switches on the modem (see
DIP switches
on page 96).
Set the following:
• SCSI IDs on the CD-ROM and tape drives (see pages
the CD-ROM drive SCSI ID and DIP switches
and
Setting the tape drive SCSI ID
• DIP switches on the CD-ROM drive (see
ROM drive SCSI ID and DIP switches
• device termination on the CD-ROM and tape drives (see
Setting SCSI device termination
Insert the 201i server into two consecutive slots inside the
switch. For instructions, see:
• large Meridian 1 systems, such as Option 51C (see
the 201i server in the large Meridian 1 switch
• Option 11C or Option 11C Mini (see
in the Option 11C or Option 11C Mini switch
• Communication Server 1000 (see
page 82)
Install the MPC cards, if required (see
page 110).
Connect the 201i server and devices as follows:
Connect the monitor, keyboard, and mouse to the 201i server
faceplate (see
Installing the monitor, keyboard, and mouse
page 113).
Description
Installing the SCSI cables
Installing the intermediate
on page 60.
Installing the NTRH3502
on page 85
Setting the modem
on page 98
on page 100)
Setting the CD-
on page 98)
on page 101)
on page 43)
Installing the 201i server
on page 57)
Installing the 201i server
Installing the MPCs
Installation checklist
Check
Setting
Installing
on
on
on
December 2010
31
Advertisement
Table of Contents
