Avaya CallPilot 201i Hardware Installation page 89

1. Insert the bottom tabs of the front cover plate inside the bottom rail.
2. Align the screw holes on the front cover plate over the screw heads on the Media
3. Slide the front cover plate downward to the right, ensuring that the side tabs slide
4. Tighten the screws to secure the front cover plate.
5. Continue with
To replace the front bezel
1.
®
Avaya CallPilot 201i Server Hardware Installation
Gateway or Media Gateway Expansion.
behind the side rail.
"To replace the front bezel
Warning:
Risk of eye injury
Avaya recommends that you operate the Media Gateway and Media Gateway
Expansion with their front bezels installed. When the blue LEDs inside these units
are lit, they are very bright.
To replace the inside front cover plate
on page 89," below.
December 2010 89