Table of Contents
Advertisement
Connecting peripheral devices to the 201i server
2. If you have not already done so, connect the amphenol connector drain wire as
®
122
Avaya CallPilot
IF you are installing the 201i
server in a
Note:
Ensure that the cable is securely fastened.
follows:
• Option 11C or Meridian 1 to the nearest backplane grounding bolt on the switch
The following diagram shows drain wire connection on the Option 11C.
• Option 11C Mini or Communication Server 1000 to a screw on the back of the
cabinet
201i Server Hardware Installation
THEN
the high-density connector associated with the
left slot occupied by the 201i server.
December 2010
Advertisement
Table of Contents
