Table of Contents
Advertisement
2. Thread the cable up through the card cage.
3. Connect the grounding braid on the intermediate SCSI cable to the card cage, and
®
Avaya CallPilot
201i Server Hardware Installation
Important:
Before you disconnect the cabling, take the telephony equipment
services associated with the cabling out of service.
c. Remove the two screws on the right side of the Option 11C I/O panel.
d. Attach the intermediate SCSI cable bracket assembly, using the screws
that were removed previously, so that the SCSI connector appears on
the right side of the Option 11C cabinet.
See the following diagram:
Note:
When routing the SCSI cable through the card cage, ensure the second cable
ferrite is placed halfway through the opening.
tighten the screw.
Before you begin
December 2010
63
Advertisement
Table of Contents
