Table of Contents
Advertisement
Installing the 201i server in an Option 11C or Option 11C Mini
3. Refasten the inner SCSI bracket screws in their original locations inside the cabinet.
4. Connect the low-profile right-angle SCSI connector on the NTRH3502 cable to the
5. Fasten the SCSI cable drain wire to the top screw that previously held the inner
®
68
Avaya CallPilot
201i Server Hardware Installation
You will use the top screw later to fasten the NTRH3502 SCSI cable drain wire.
SCSI connector on the 201i server faceplate.
SCSI bracket in place.
December 2010
Advertisement
Table of Contents
