Table of Contents
Advertisement
Installing the 201i server in an Option 11C or Option 11C Mini
To position the 201i server on the switch shelf
1. Remove the front panel of the switch.
2. Ensure that no cables are connected to the slots in which you are installing the 201i
3. Open the lock latches at the top and bottom of the 201i server faceplate.
®
58
Avaya CallPilot
201i Server Hardware Installation
Switch
Note:
On the Option 11C Mini, do the following:
a. Loosen the spring-loaded clips.
b. Slide the cover to the left.
c. Pull the cover up to remove it from the cabinet.
See the following diagram:
server.
Eligible slots
For more information about cards and slots, refer to
the Option 11C Mini documentation.
December 2010
Advertisement
Table of Contents
