Status Register - Base+6 And Base+7; Table C-8: Status Register - Advantech MIC-3716 Manual

C.8 Status Register — BASE+6 and BASE+7
The registers of BASE+6 and BASE+7 provide information for A/D
configuration and operation.
Write
Bit #
BASE + 7 CAL
BASE + 6 AD16/12
The content of the status register of BASE+6 is the same as that of the
control register.
F/E
F/H
F/F
IRQ

Table C-8: Status Register

7 6
CNT0 ONE/FH
FIFO Empty flag
This bit indicates whether the FIFO is empty.
1 means that the FIFO is empty.
FIFO Half-full flag
This bit indicates whether the FIFO is half-full.
1 means that the FIFO is half-full.
FIFO Full flag
This bit indicates whether the FIFO is full.
1 means that the FIFO is full.
Interrupt flag
This bit indicates the interrupt status.
1 means that an interrupt has occurred.
A/D Control Register
5 4
IRQEN GATE
3 2
IRQ F/F F/H
EXT PACER
1 0
F/E
SW
89