Fig. 2-3: The device name listed on the Device Manager
Note:
If your card is properly installed, you should see the device name of your
card listed on the Device Manager tab. If you do see your device name
listed on it but marked with an exclamation sign "!", it means your
card has not been correctly installed. In this case, remove the card
device from the Device Manager by selecting its device name and press
the Remove button. Then go through the driver installation process again.
After your card is properly installed on your system, you can now
configure your device using the Device Manager program that has
itself already been installed on your system during driver setup. A
complete device installation procedure should include device setup,
configuration and testing. The following sections will guide you
through the setup, configuration and testing of your device.
19