Note:
If you installed the card without installing the DLL driver first, Windows
95/98 will not recognize your card and label it as an "unknown device".
After rebooting, you will be prompted to provide the necessary driver.
You should ignore the prompting messages (just click the Cancel button)
and set up the driver according to the steps described in 2.2 Software
Installation.
After the MIC-3716 card is installed, you can verify whether it is
properly installed on your system with the Device Manager:
1. Access the Device Manager through:
Start/ Control Panel/ System/ Device Manager
2.
The device name of the MIC-3716 should be listed on the Device
18
Manager.