Fig. 5-8: A/D Calibration Is Finished - Advantech MIC-3716 Manual

Step 8: Auto-calibration is finished. (Fig. 5-8)

Fig. 5-8: A/D Calibration is finished

D/A channel Auto-Calibration
Step 9: Click the Auto D/A Calibration tab to show the D/A channel
auto calibration panel. Please finish the A/D calibration
procedure first before you start the D/A calibration procedure.
There are two D/A channels in MIC-3716; select the output
range for each channel and then press the start button to
calibrate the D/A channels (Fig. 5-9).
59