Parameter Group - Danfoss VLT FC 100 Manual

8. Parameters
[1]
[2]
[3]

8.3. Parameter Group 11

8
11-00 Neuron ID
Option:
11-10 Drive Profile
Option:
[0]
11-15 LON Warning Word
Range:
*
0
58
Bus
Logic AND
* Logic OR
NB!
This parameter is active only when
control word .
* VSD Profile
[0 - FFFF ]
MG.11.E1.02 - VLT
Activates Preset Reference selection via the serial communica-
tion port or fieldbus option.
Activates Preset Reference selection via the fieldbus/serial com-
munication port, AND additionally via one of the digital inputs.
Activates the Preset Reference selection via the fieldbus/serial
communication port OR via one of the digital inputs.
Select control of the frequency converter Preset Reference se-
lection via the terminals (digital input) and/or via the fieldbus.
par. 8-01 Control Site
Function:
View the Neuron chip's unique Neuron ID number.
Function:
This parameter allows selecting between LONMARK Functional
Profiles.
The Danfoss Profile and the Node Object are common for all
profiles.
Function:
This parameter contains the LON specific warnings.
® is a registered Danfoss trademark
VLT® FC 100 LonWorks
Digital and
is set to [0]