Danfoss VLT FC 100 Manual page 36

5. Configuration of the system
5.3.4. Configuration Properties (nci)
Variable function
Max. motor speed [%]
Min. motor speed [%]
Nom. motor speed [RPM]
Nom. motor frequency [Hz] nciNmlFreq
Min. ramp-up time [s]
5
Min. ramp-down time [s]
Heartbeat time [s]
A range of network configuration variables (SCPT's) is available for configuration of the frequency
converter parameters. These parameters require setting only once, usually following installation.
36
Variable name
nciMaxSpeed
nciMinSpeed
nciNmlSpeed
nciRampUpTime
nciRampDownTime
nciSndHrtBt
NB!
Please note that the settings written to configuration properties (nci's) will be stored
in the non-volatile memory. Continuous writing to configuration properties may
damage the non-volatile memory.
MG.11.E1.02 - VLT
SNVT type
SNVT_lev_per-
cent
SNVT_lev_per-
cent
SNVT_rpm
SNVT_freq_hz
SNVT_time_sec
SNVT_time_sec
SNVT_time_sec
® is a registered Danfoss trademark
VLT® FC 100 LonWorks
FC 100
Profile param-
eter
VSD 6010 4-13
VSD 6010 4-11
VSD 6010 1-25
VSD 6010 1-23
VSD 6010 3-41
VSD 6010 3-42
VSD 6010 -