Danfoss VLT FC 100 Manual page 26

5. Configuration of the system
These variables contain the value allocated to the analog output terminal X42/7-11 of the
I/O option
Setting of RTC
Variable
name:
5
nviTimeStamp
Use this input to set the built-in Real Time Clock.
ECB Option Mode
Variable
name:
nviECBMode
Controls the operation mode of the ECB option. The binary value of this variable is mapped directly
into par. 31-00.
[0] Drive
[1] Bypass
ECB Remote By-pass Activation
Variable
name:
nviECBActivation SNVT_state
Controls the remote activation of the ECB option.
The binary value of this variable is mapped directly into par. 31-90.
[0] Disabled
[1] Enabled
Parameter Access Command
Variable
name:
nviParamRequest SNVT_param_request
26
. The variable type is changeable with the commissioning tool.
NB!
This variable is available only if the Analog I/O option (MCB 109) has been installed.
SNVT
type:
SNVT_time_stamp
SNVT
type:
SNVT_state
SNVT
type:
NB!
This input variable applies only if the ECB option is installed in the frequency con-
verter.
SNVT
type:
MG.11.E1.02 - VLT
Field:
Year Month Day Hour
2000
0 - 12 0 - 31 0 - 23
-3000
State:
Boolean 1 bit x 16
State:
Boolean 1 bit x 16
® is a registered Danfoss trademark
VLT® FC 100 LonWorks
Analog
Minute Second
0 - 59 0 - 59
Value: