Danfoss VLT FC 100 Manual page 59

VLT® FC 100 LonWorks
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
11-17 XIF Revision
*
0
11-18 LonWorks Revision
*
0
11-21 Store Data Values
Option:
*
[0]
[2]
Status
Internal fault
Internal fault
Internal fault
Internal fault
Internal fault
Invalid type change for nvoAnIn1
Invalid type change for nvoAnIn2
Invalid type change for nvo109AnIn1
Invalid type change for nvo109AnIn2
Invalid type change for nvo109AnIn3
Initialization error
Internal communication error
Software revision mismatch
Bus not active
Option not present
LON input (nvi/nci) exceeds limits
[0 - 0]
Read only.
This parameter contains the version of the external interface file
on the Neuron C chip on the LON option.
[0 - 0 ]
Read only.
This parameter contains the software version of the application
program on the Neuron C chip on the LON option.
Function:
Off Store function is inactive.
Store All Set-ups
Stores all parameter values in the E
to Off
This parameter is used to activate storing of data in non-volatile
memory.
MG.11.E1.02 - VLT ® is a registered Danfoss trademark
when all parameter values have been stored.
8. Parameters
2 PROM. The value returns
8
59