Danfoss VLT FC 100 Manual page 56

8. Parameters
8-10 Control Word Profile
Option:
[0]
8-50 Coasting Select
Option:
[0]
[1]
[2]
[3]
8
8-52 DC Brake Select
Option:
[0]
[1]
[2]
[3]
8-53 Start Select
Option:
[0]
[1]
[2]
[3]
56
* FC profile
Digital input
Bus
Logic AND
* Logic OR
NB!
This parameter is active only when
control word
.
Digital input
Bus
Logic AND
* Logic OR
NB!
This parameter is active only when
control word
.
Digital input
Bus
Logic AND
*
Logic OR
MG.11.E1.02 - VLT
Function:
Select the interpretation of the control and status words corre-
sponding to the installed fieldbus. Only the selections valid for
the fieldbus installed in slot A will be visible in the LCP display.
Function:
Select control of the coasting function via the terminals (digital
input) and/or via the bus.
par. 8-01 Control Site
Function:
Select control of the DC brake via the terminals (digital input)
and/or via the fieldbus.
par. 8-01 Control Site
Function:
Activates Start command via the serial communication port or
fieldbus option.
Activates Start command via the fieldbus/serial communication
port, AND additionally via one of the digital inputs.
Activates Start command via the fieldbus/serial communication
port OR via one of the digital inputs.
® is a registered Danfoss trademark
VLT® FC 100 LonWorks
is set to [0] Digital and
is set to [0] Digital and