Danfoss VLT FC 100 Manual page 57

VLT® FC 100 LonWorks
8-54 Reversing Select
Option:
*
[0]
[1]
[2]
[3]
8-55 Set-up Select
Option:
[0]
[1]
[2]
*
[3]
8-56 Preset Reference Select
Option:
[0]
Select control of the frequency converter start function via the
terminals (digital input) and/or via the fieldbus.
NB!
This parameter is active only when
control word
.
Function:
Digital input
Bus Activates Reverse command via the serial communication port
or fieldbus option.
Logic AND Activates Reverse command via the fieldbus/serial communica-
tion port, AND additionally via one of the digital inputs.
Logic OR Activates Reverse command via the fieldbus/serial communica-
tion port OR via one of the digital inputs.
Select control of the frequency converter reverse function via
the terminals (digital input) and/or via the fieldbus.
NB!
This parameter is active only when
control word .
Function:
Digital input
Bus Activates the set-up selection via the serial communication port
or fieldbus option.
Logic AND Activates the set-up selection via the fieldbus/serial communi-
cation port, AND additionally via one of the digital inputs.
Logic OR Activate the set-up selection via the fieldbus/serial communica-
tion port OR via one of the digital inputs.
Select control of the frequency converter set-up selection via
the terminals (digital input) and/or via the fieldbus.
NB!
This parameter is active only when
control word
.
Function:
Digital input
MG.11.E1.02 - VLT ® is a registered Danfoss trademark
par. 8-01 Control Site
is set to [0]
par. 8-01 Control Site
is set to [0]
par. 8-01 Control Site is set to [0]
8. Parameters
Digital and
8
Digital and
Digital and
57