Technical Data - WAGO -I/O-SYSTEM 750 Series Manual

2.1.1.5

Technical data

Module-specific data
AS-Interface specification
Number of slaves
Current consumption (AS-
Interface)
Supply voltage (AS-Interface)
AS-Interface cable length
Cycle time AS-Interface
Configuration
Transmission channel
Current consumption
Supply voltage
Potential isolation
Data width
Dimensions (mm) W x H x L
Weight
Norms and Directives (cf. Chapter 2.2 in manual for coupler/controller)
EMC Immunity to interference CE according to EN 61000-6-2 (1996), EN 50295 (1999)
EMC Emissions of interference
CE
Approvals (cf. Chapter 2.2 in manual for coupler/controller)
More Information
Detailed references to the approvals are listed in the document "Overview
Approvals WAGO-I/O-SYSTEM 750", which you can find on the CD ROM
ELECTRONICC Tools and Docs (Item-No.: 0888-0412)
or in the internet under:
www.wago.com
System Description
WAGO-I/O-SYSTEM 750
I/O Modules
750-655 [AS-Interface master module]
2.1
up to 62
40 mA
26.5 V ... 31.6 V
100 m, with repeater 300 m
max.
0.3 ms ... 10 ms, depending on number of slaves
via process image, WAGO-I/O-CHECK 2
or AS-Interface mode contacts
1
(internal) 55 mA
max.
DC 24 V via power contacts
500 V system / supply / AS-Interface connection point
12 ... 48 bytes max. freely configurable,
including 1 byte control / status
12 x 64* x 100
* from upper edge of mounting rail DIN 35
ca. 70 g
according to EN 61000-6-4 (2001)
UL (UL508)
C US
Conformity Marking
! Documentation ! WAGO-I/O-SYSTEM 750 !
• 15
Technical data