WAGO -I/O-SYSTEM 750 Series Manual page 83

Set up LPS (SET_LPS_A/B, 0x6B)
The list of set-up AS-Interface slaves is transferred to the non-volatile
memory of the master with this call.
When this command is executed, the AS-Interface switches the master into the
offline phase and then returns to normal mode (restart AS-Interface master).
This command is only executed in set-up mode.
Using the A and B slave switching, this command can also be used for a 6-
byte mailbox. If the A/B flag is not set, the data for the A slaves are
transmitted first and then the data for the B slaves. If the flag is set, the data
for the B slaves are transmitted first and then the data for the A slaves.
Note:
In order to transmit the data for all slaves with a 6-byte mailbox, the
command must be called once with A/B = 0 and once with A/B = 1.
Byte
...
...
10
WAGO-I/O-SYSTEM 750
I/O Modules
Request (for A/B = 0)
7 6 5
2 2 2
1
2 T 0 0
3 7A 6A 5A
6 31A 30A 29A
7 7B 6B 5B
31B 30B 29B
Mailbox command - Reference
4 3 2 1
2 2 2 2
0x6B
-
4A 3A 2A 1A
...
28A 27A 26A 25A
4B 3B 2B 1B
...
28B 27B 26B 25B
Appendix
0
2
-
24A
-
24B
• 83