C Associations Between Alarms And Dry Contacts On The Uim - Huawei TP48200A-DT19D1 Telecom Power User Manual

TP48200A-DT19D1 Telecom Power
User Manual
C
Table C-1 Associations between dry contacts and alarms
Dry Contact Type
Dry contact inputs
Dry contact outputs
The default setting (closed:
alarm; open: normal) can be
modified.
Issue 03 (2019-11-15)
Associations Between Alarms and Dry
Silkscreen
DIN1
DIN2
DIN3
DIN4
DIN5
DIN6
ALM1
ALM2
ALM3
ALM4
ALM5
ALM6
ALM7
ALM8
Copyright © Huawei Technologies Co., Ltd.
C Associations Between Alarms and Dry Contacts on the
Contacts on the UIM
Associated Alarm
Dry contact input 1
Dry contact input 2
Dry contact input 3
Dry contact input 4
Heater fault alarm
Air conditioner fault alarm
Dry contact input 6
Mains failure
DC over/undervoltage
Rectifier faults
AC or DC SPD faults
Load fuse blown, battery fuse blown, or loop
disconnection
Battery over/undertemperature
Door status alarm
Heater/Air conditioner/Fan fault alarm
UIM
90