Huawei TP48200A-DT19D1 Telecom Power User Manual page 83

TP48200A-DT19D1 Telecom Power
User Manual
Procedure
Step 1 Connect the ground cable to the ESD wrist strap, and put on the ESD wrist strap and ESD
gloves.
Step 2 Remove the water sensor cable from the UIM, as shown in Figure 4-26.
Figure 4-26 Removing the water sensor cable
Step 3 Cut off the cable tie of the water sensor and remove the water sensor.
Issue 03 (2019-11-15) Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
76