Huawei TP48200A-DT19D1 Telecom Power User Manual page 87

TP48200A-DT19D1 Telecom Power
User Manual
Procedure
Step 1 Connect the ground cable to the ESD wrist strap, and put on the ESD wrist strap and ESD
gloves.
Step 2 Remove the screws, lift the air filter upwards about 40 mm, and then remove the air filter by
tilting it outwards at a proper angle, as shown in Figure 4-30.
Figure 4-30 Removing the air filter
Step 3 Properly place the new air filter (place the side with label on the up direction and place the
side with tapes towards the cabinet door), then tighten the screws for the air filter.
Step 4 Disconnect the ground cable from the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
Issue 03 (2019-11-15) Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
80