Huawei TP48200A-DT19D1 Telecom Power User Manual page 89

TP48200A-DT19D1 Telecom Power
User Manual
Figure 4-32 Removing the intelligent battery detector
Step 6 Install the new intelligent battery detector.
Step 7 Reconnect the cables to the intelligent battery detector based on the recorded positions.
1.
2.
3.
Step 8 Install the protective cover of the intelligent battery detector.
Step 9 Switch on the circuit breaker of the intelligent battery detector on the DC PDU.
Step 10 Disconnect the ground cable for the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
Follow-up Procedure
Pack the removed component, and return it to Huawei local warehouse.
Issue 03 (2019-11-15)
Install the ground cable for the intelligent battery detector.
Connect the battery voltage detection cable and the communications cable.
Connect the power cables to the intelligent battery detector.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
82