Raycus RFL-C Series User Manual page 29

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide 1000W/1200W/1500W Ver: 1.0
Interlock is ok................................................
..............
The laser emission is disabled.......................
Checking temperature...........................
Module 1 temperature 1=XX ℃ OK
Module 1 temperature 2=XX ℃ OK
Module 1 temperature 3=XX ℃ OK
Module 1 temperature 4=XX ℃ OK
Module 2 temperature 1=XX ℃ OK
Module 2 temperature 2=XX ℃ OK
Module 2 temperature 3=XX ℃ OK
Module 2 temperature 4=XX ℃ OK
Module 3 temperature 1=XX ℃ OK
Module 3 temperature 2=XX ℃ OK
Module 3 temperature 3=XX ℃ OK
Module 3 temperature 4=XX ℃ OK
System has started, please wait................
The hyper terminal shows the system self-check process-check RS-232 connection, interlock,
laser emission status, and system temperature. While doing temperature checking, hyper terminal
will show the temperature on different test points.
If „Interlock error, please power off the laser and check interlock‟ is presented, please follow the
instructions to power off the laser, short the interlock, and then start the product again.
Checking RS-232 connection............................
RS-232 connected..........................................
System is doing self-check, please wait........
27