Raycus RFL-C20000XZ User Manual
  1. Manuals
  2. Brands
  3. Raycus Manuals
  4. Measuring Instruments
  5. RFL-C20000XZ
  6. User manual
Raycus RFL-C20000XZ User Manual

Raycus RFL-C20000XZ User Manual

Continuous-wave fiber laser
Hide thumbs Also See for RFL-C20000XZ:
Table of Contents

Advertisement

Quick Links

Download this manual
朱超
谢良
武汉锐科光纤激光技术股份有限公司
名称
RFL-C20000XZ 连续光纤激光器
英文版使用说明书
连续激光器技术研究部
单位
编写
校对
审核
标审
批准
编号
密级
阶段标记
页数
阮勇
刘阳
王建明
李其军
王建明
RFL-
C20000XZ-
JS01
内 1
S
85

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RFL-C20000XZ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Raycus RFL-C20000XZ

Summary of Contents for Raycus RFL-C20000XZ

  • Page 1 RFL- 编号 C20000XZ- JS01 内 1 密级 阶段标记 页数 名称 RFL-C20000XZ 连续光纤激光器 英文版使用说明书 朱超 连续激光器技术研究部 单位 谢良 阮勇 编写 刘阳 校对 王建明 审核 李其军 标审 王建明 批准 武汉锐科光纤激光技术股份有限公司...
  • Page 2 RFL-C20000XZ Continuous-Wave Fiber Laser User Guide...
  • Page 3 Wuhan Raycus Fiber Laser Technologies Co., Ltd.

  • Page 4: Table Of Contents

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ CONTENTS 1. SAFETY INFORMATION........................1 1.1 S .............................1 ECURITY ABELS ............................2 1.2 L ASER AFETY RADE ..............................2 1.3 O PTICAL AFETY ............................2 1.4 E LECTRICAL AFETY ............................3 1.5 O...
  • Page 5 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 4.4.4 Analog Interface XP4........................36 4.4.5 INTERNET Interface XP5......................... 36 ......................37 4.5 I NTRODUCTION TO AFETY NTERLOCK ............. 37 4.6 S CHEMATIC DIAGRAM OF THE INTERNAL ELECTRICAL CIRCUIT OF THE LASER 4.7 S...
  • Page 6 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ .......................... 58 8.2 M ULTI LASER ONTROL 8.2.1 Add/delete laser..........................59 8.2.2 Modify laser IP.............................60 ........................61 8.3 M AIN WORKING STATUS DISPLAY 8.3.1 Laser’s cumulative operating time display area................. 62 8.3.2 Laser working status display area.......................63...
  • Page 7 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 8.13.5 Command Explanation........................82 9. WARRANTY, REPAIR AND RETURN.................... 83 9.1 G ............................83 ENERAL ARRANTY 9.2 L ..........................84 IMITATIONS OF ARRANTY ............................84 9.3 S ERVICE AND EPAIR...

  • Page 8: Safety Information

    1 Safety Information Thank you for choosing Raycus Fiber Laser. This user manual provides you with important safety, operation, maintenance and other relevant information. Please read the manual carefully before using this product. To ensure safe operation and optimum product operation, please carefully review the following cautions and warnings as well as other information within this manual.

  • Page 9: Laser Safety Grade

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 7: Electrical Hazard 1.2 Laser Safety Grade According to Clause 9 from European Standard EN 60825-1, this series of lasers are Class 4 laser instruments. The product emits laser radiation at a wavelength of 1080 nm or around 1080 nm, and the average laser power radiated from the output head is 20 kW.

  • Page 10: Other Safety Rules

    There are no user serviceable parts, equipment or assemblies inside the product. All service and maintenance shall be conducted by a certified Raycus engineer. In order to prevent electric shock, please do not break the seal or uncover the shield. Otherwise, any damage to the device will not be guaranteed.

  • Page 11: Package Parts

    Once you find that there is an abnormality in the external cabinet, please inform Raycus Company in time to deal with it as soon as possible. Please double check if each listed object is inside the package; and contact Raycus as soon as possible if there are any issues.

  • Page 12: Operation Environment

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 2.4 Operation Environment The operation conditions are listed as the following table: Table 1: The Operation Environment for the Laser Model C20000XZ Supply voltage (V) Three-phase four-wire system AC 323V~AC 437V、50/60Hz (including PE) Power supply capacity ＞85...

  • Page 13: Specifications

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ c) Please cap the output head when it is not in use. Do not touch the output lens at any time. Use appropriate lens paper to clean it if necessary.

  • Page 14: Installation

    Weight (kg) Air conditioning included ＜800 Operating Ambient Temperature (°C) 10～40 Humidity (%) ＜70 Storage temperature (°C) -10～60 Cooling method Water cooling 3 Installation 3.1 Dimensions The main body dimensions of RFL-C20000XZ continuous wave fiber laser are shown in Figure 1.
  • Page 15 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 1-a Front and rear view of the laser. Figure 1-b Top and left view of the laser. Figure 1 the dimensions of RFL-C20000XZ continuous fiber laser...

  • Page 16: Installation Rule

    If the output cable lens is dirty, the lens must be cleaned. It is forbidden to disassemble the output lens by anyone other than staffs from Raycus, otherwise the warranty will be invalidated.
  • Page 17 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Do not step on, squeeze or excessively bend the protective tube during the installation of the output optical cable to avoid damage to the optical fiber. g) In the process of installing the optical cable output head, ensure the cleanliness of the surrounding environment (do not use electric fans to dissipate heat when it is hot in summer to avoid large dust in the air).

  • Page 18: Protective End Cap Of Output Cable And Using Descriptions

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 3 Laser top lifting ring and bottom level adjustment caster. CAUTION: All the cables can only be connected when power supply is off. Hot plug may damage the device.
  • Page 19 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Table 3 instruction for protective end cap of output optical cable End cap type of ex- Model of machine Model of cable End cap type factory A-type end cap（with A-type end cap（with...

  • Page 20: Cleaning Description Before Installation

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 4 diagram of protective end cap. 3.3.2 Cleaning Description before Installation a) Preparation tools 1.1 Cleaning agent: anhydrous ethanol, or isopropanol. 1.2 Cleaning tools: cleaning swab, dust-free paper, compressed air bottle, etc.
  • Page 21 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure5 Output optical cable place inside packaging box. 1) Place output optical cable in a clean workbench; Note: the following operations need to be carried out in a clean workbench. If the operation is not carried out in a clean environment, it will cause great risks to the QP output optical cable;...
  • Page 22 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Note: the dust-free paper is disposable, and there is a risk of dust falling if it is used repeatedly. Figure 7 remove the output optical cable of white anti-dust cover.
  • Page 23 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ operation. If the operation mode is improper, the output optical cable will be irreversibly damaged. After the cleanliness is ensured, load the B type end cap. During the installation process, when screwing it to the bottom, there will be resistance, which is a Normal phenomenon.

  • Page 24: Cooling Requirements

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 3.4 Cooling Requirements Table 4 Cooling Requirements Cooling water Input Hose inner Cooling temperature Model Minimum flow (L/min) pressure diameter capacity (kW) (Bar) (mm) (℃) ＞167 Top flow Bottom flow RFL-C20000XZ 4～6...
  • Page 25 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 10 diagram of laser cooling system connection. Water cooling requirements for output optical cables: a) Water flow requirements: water flow for QP output cable is more than 3.0L/min;...

  • Page 26: Using The Product

    (2) Before turning on the laser, the cooling system must be working properly, and the water temperature should be suitable for the temperature. 4 Using the Product Please log in to the official website of Raycus to download the new PC software and the PC software user manual. Website: http://www.raycuslaser.com 4.1 Front Panel...
  • Page 27 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ ① ② ③ ④ ⑥ ⑤ Figure 11 Front view of the panel Note: ① REM/OFF/ON ② POWER ③ LASER ④ ALARM ⑤ STOP ⑥ INDICATOR LIGHT REM/OFF/ON: The key switch is the main control switch of the laser. Insert the key and turn it to the "ON"...

  • Page 28: Rear Panel

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ STOP: Emergency stop button, press it to turn off the laser immediately; turn clockwise to release the button. Use the key to turn on the laser and power on the laser again to return to normal.
  • Page 29 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ ① ④ ⑤ ⑥ ② ⑦ ⑧ ③ ⑨ ⑩ Figure 12 Rear view of product panel. Note: ①-INTERFACE ③-AC INPUT ②-BREAKER ④-FIBER WATER IN ⑤-FIBER WATER OUT ⑥-BOTTOM WATER IN ⑧-TOP WATER IN...
  • Page 30 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ ①INTERFACE: this interface provides all control signals, including: RS232 communication, laser on/off control, laser remote control mode selection, analog control, modulation signal, Interlock interface, etc. Refer to Table 4 for the definition of control lines. This socket comes with a protective cover and a lock.

  • Page 31: Power Connection

    (2) Incorrect wiring will cause damage to the laser, so please check whether the power cord is connected correctly before powering on the laser. Figure 13 shows the power cord provided by Raycus. Figure 13 RFL-C20000XZ Laser source power cord Insert the plug at the end of the power cord into the socket marked "AC INPUT"...
  • Page 32 Socket Figure 14 RFL-C20000XZ physical picture of power cord plugs and socket The AC input line of RFL-C20000XZ laser adopts a seven-core cable. The definition and parameter requirements of the AC input line interface are shown in Table 5. Table 5 The interface definition and parameter requirements of AC input line.

  • Page 33: Control Interface Definition

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 4.4 Control Interface Definition This type of laser does not provide a control signal line, only a control signal connector. The appearance of the joint is shown in Figure 15.
  • Page 34 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Table 6 XP2 security interface definition Type Description Number MOD+ Output control, voltage input signal; laser ON：4～30V; Laser OFF：-3～2V. MOD- Highest frequency 5kHz OUT （ FET S Laser output indication, MOS pipe D、S output;...
  • Page 35 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ a) MOD SINGLE Figure 16 MOD Signal Circuit Diagram. This signal is 5/24V compatible, and reverse connection is not allowed. MOD is used to control the laser output and off when the key switch is hit ON and the laser is working out of light external control mode.
  • Page 36 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 17 Out light output and main power up indication circuit diagram Customer 12v positive power supply Indicator light (12V for example) Customer 12v negative power supply Figure 18 Recommended wiring diagram for light output indication (12V as an example).
  • Page 37 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Customer 12v positive power supply Indicator light (12V for example) Customer 12v negative power supply Figure 19 Recommended wiring diagram for main power up indication (12V as an example) c) Active light out indication and main power up indication.
  • Page 38 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 24V Main power supply 24V light output online indicator light indicator Figure 21 Active light indication and main power supply has been powered on the recommended wiring diagram. d)Powering up the remote-control board ON/OFF switch Figure 22 Remote control board power-up recommended wiring diagram.

  • Page 39: Hard Wiring Xp1

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ When the laser key switch hits REM mode, pin 8/9 must be shorted to the main control board to power up. e) Remote Mains Power Up This signal is used to enable mains power-up via the XP2 interface.
  • Page 40 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Import signal, rising edge start according to the pre-downloaded programming instructions output laser, program number is determined by the A8~A14. Programming The laser power is set by AD analog if the program...
  • Page 41 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Input signal: C3 is low, C6 is high ;0000-gate closing ,0001-gate 1 open ,0010-gate 2 open, Choice of gate C3～C6 Input signal 0011-gate 3 open（Open only to laser with channel optical gate, Normal type this pin standby）...
  • Page 42 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Programming Output signal, indicating that the laser mode execution Output signal programming mode is completed, the bit clears completed when the A2 is invalid Abnormal Wave output signal indicating that the laser...

  • Page 43: Rs232 Xp3 Interface

    The 9-pin serial interface is used for the communication between the laser and the upper computer. It can be used to communicate with the upper computer of Raycus Company or the software of the upper computer which integrates the communication protocol of Raycus. The definitions are as follows：...

  • Page 44: Introduction To Safety Interlock

    Connectionless 4.5 Introduction to Safety Interlock Raycus’ product is designed with a safe interlocking loop, which is a two-channel system with output monitoring and manual reset. When the safety interlocking circuit is open, the safety circuit will disconnect the working power of the optical module, that is, the main power supply of the optical module.

  • Page 45: Schematic Diagram Of The Internal Electrical Circuit Of The Laser

    Figure 24 Schematic diagram of the internal electrical circuit of the laser. Note: in the strong power control part contactor K1 and K2 of RFL-C20000XZ laser, its power part is 3 pieces 50A contactors in parallel use, and signal end 6 in series use.

  • Page 46: Control Mode Selection

    5 Control Mode Selection Raycus high-power continuous wave laser has two control modes: respectively ON mode and REM mode; the user can select mode that needs to enter through the key to the front panel.
  • Page 47 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ ⒀ ⑿ XP1-A1 、 A5 XP4-1 、 2pin enable⑧ close⑥ close⑦ communication⑾ high pressure level XP1-A1 laser request is high. XP1-A2 light XP1-A1 、 A5 communication close⑤ enable⑨ close⑦...

  • Page 48: On Mode

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ XP1-A1is high level，XP1-A3is high level; XP1-A1is high level，XP1-A8~A14 is low level and suspending; XP1-A1is high level，XP1-A6is high level XP1-A1is high level，XP1-A3 is low level and suspending; XP1-A1is high level，XP1-A8~A14 is not all low level;...

  • Page 49: Emission External Control Enable

    In the ON mode, when the current program number of the laser is not 0, the laser will run in the programming mode. Please use the computer software of Raycus to edit the wave and select the pre-operation program number.

  • Page 50: Rem Mode

    10 MS when the red light is turned on and off; When the red light is on, the laser cannot be set to ready. Only when the red light is off, can the laser be ready (this limit can be changed, please contact Raycus Engineer). 5.6.4 Programming mode When A1 of xP1 is set high and a8-a14 is not 0, the laser is in programming mode.

  • Page 51: Wiring Diagram And Operation Steps

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 6.1 Internal control in ON mode Figure 25 wiring diagram of “ON” mode of key switch. Operation methods： 1. Turn the knob switch of the rear panel to on;...

  • Page 52: Emission External Control Mode Set By Power Communication In On Mode

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 6.2 Emission external control mode set by power communication in ON mode Figure 26 wiring diagram of Emission external control mode set by power communication in ON mode. Operation methods：...

  • Page 53: Emission External Control Set By Power Analog In On Mode

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 6.3 Emission external control set by power analog in ON mode Figure 27 Wiring diagram of emission external control set by power analog on the ON mode. Operation methods：...

  • Page 54: Emission External Control Through Programming Mode On The On Mode

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 7. Wait for Ready; 8, The control board outputs analog and light output signal; 6.4 Emission external control through programming mode on the ON mode Figure 28 Wiring diagram of Emission external control through programming mode on the ON mode.

  • Page 55: Set The Power Analog As Emission External Control On The Rem Mode

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 5. Click main power ON button; 6. Wait for Ready; 7, Set the wave number of pre-operations（program number is more than 0）; 8, The lifting edge of MOD signal starts wave;...

  • Page 56: Rem Mode Power Communication Set Out Light External Control

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Operation methods： 1，Turn the knob switch of the rear panel to ON button; 2，Turn the key switch to REM button; 3，Short PIN8/9 of XP2; 4，XP1-A1 connects 24V, XP1-A6 connects 24V；...
  • Page 57 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 31 Wiring diagram of setting power communication as emission external control on REM mode. operation methods： 1，Turn the knob of the rear panel to ON button; 2，Turn the key switch to REM;...

  • Page 58: Programming Mode In Rem Mode

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 7，Wait for Ready button； 8，the computer software sets power, XP1-A2 connects 24V，control board outputs MOD signal； 6.7 Programming mode in REM mode Figure 32 Wiring diagram of programming mode on REM mode.

  • Page 59: Rs232 And Internet Communication Command

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 5，XP1-A5 is connected to 24 V to turn on red light; After checking the optics, connect XP1- A5 to 0V and turn off the red light; 6，XP1-C1 is connected to 24 V, and the main power supply is powered on (you can also directly press the LASER button, or click the ON button in the main power supply of the upper computer software);...

  • Page 60: Laser Communication Protocol (Network Port & Serial Port)

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 7.2 Laser Communication Protocol (Network Port & Serial Port) All commands and return values in this Agreement are composed of ASCII characters. Note the following points when entering： a) Commands generally consist of three or four letters, sometimes with additional values.
  • Page 61 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Send: ‘EMOFF\r’ Stop Emission Return: ‘EMOFF\r’ Send: ‘EMON\r’ EM ON Start Emission Return: ‘EMON\r’ Send: ‘MPWROFF\r’ MPWR Main Power OFF Return: ‘MPWROFF\r’ Send: ‘MPWRON\r’ MPWR Main Power ON Return: ‘MPWRON\r’...
  • Page 62 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Send: ‘RCT\r’ Read Laser Temperature Return: ‘RCT:34.5\r’ Send: ‘PERR\r’ PERR Reset Errors Return: ‘PERR\r’ Send: ‘SUT 50\r’ Set Up Time (MS) Return: ‘SUT:50\r’ Send: ‘SDT 50\r’ Set Down Time (MS) Return: ‘SDT:50\r’...
  • Page 63 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Emission Off Bit 2 Emission On or in preparation No high reflection Bit 3 High reflection Abnormal External AD mode=off Bit 4 External AD mode=on Power Correction Mode=off Bit 5...
  • Page 64 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ AC input abnormal External Emission control=off Bit 18 External Emission control=on Normal Bit 19 Laser fault Slow up slow down mode off Bit 20 Slow up slow down mode on A laser operates in ON"...

  • Page 65: Main Interface Of Pc Software

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 8.1 Main interface of PC software The PC software’s main interface is shown in Figure 34. Figure 34 PC software display main interface. 8.2 Multi-laser Control Area Multi-laser control area is shown in Figure 35.

  • Page 66: Add/Delete Laser

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 35 Multi-laser control area interface. Select IP address of corresponding laser, and then double click. PC software will take communication with selected laser. After the communication established, the lower left status display shows that the network connection is ok, shown in Figure 36.

  • Page 67: Modify Laser Ip

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 37 Procedure for adding a laser to the PC software. 8.2.2 Modify laser IP After the laser connection has been established, select the IP address of current laser and right-click...

  • Page 68: Main Working Status Display

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 38 Modify the IP address of laser. 8.3 Main working status display The laser’s main status display is as shown in Figure 39, Table 13.

  • Page 69: Laser's Cumulative Operating Time Display Area

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure39 diagram of the laser's main display area Table 13 the laser main display content and meaning Display Meaning Output power current setting percentage of power in real time Output power Average laser output power in real time（W）...

  • Page 70: Laser Working Status Display Area

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 8.3.2 Laser working status display area The laser working status display area is shown in Figure 41, Table 14. Figure 41 A diagram of the laser's working status display area.

  • Page 71: Laser Power-Up, Mode Selection, Light-Out Control Area

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Green: XP2 leg 18,19 on safety interface make InterLock2 make Gray: XP2 leg 18,19 on safety interface break Green: Laser is in program mode Programming model Gray: Laser is not in program mode Power slow rise &...

  • Page 72: Programming Mode Test Area

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Click ON, activate laser power correction mode; click OFF, shut laser power correction mode; Power correction mode power-off memory automatically Eliminate alarm Eliminate current laser alarm Laser ON Laser is in output...

  • Page 73: Laser Output Parameters Read The Setting Area

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 44 the power slow rise and fall setting area interface and measured programming. 8.3.6 Laser output parameters read the setting area Laser output parameter setting interface is shown in Figure 45. The output parameter setting is not valid when AD mode is on.

  • Page 74: Alarm Type Display Area

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 46 Laser parameter display area display interface. 8.5 Alarm type display area The laser alarm type display area interface is shown in Figure 47. This interface shows the cause of the alarm for the current laser.
  • Page 75 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 48 Laser operating mode selects the display area interface.

  • Page 76: Language

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Table 16 Laser operating mode and explanation Mode selection Mode explanation User mode A concise software interface Diagnostic mode Displays laser status and parameters for diagnosis purposes Authorization mode...

  • Page 77: Authorization (Time-Limited Locking)

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 8.8 Authorization (time-limited locking) 8.8.1 Authorization on user mode The authorization settings in user mode are shown in Figure 50. Laser can be locked and unlocked by valid authorization code.

  • Page 78: About

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ c) The software automatically calculates the authorization code when user click to generate an authorization code. Laser's limited time lock is achieved when user click again to set the authorization time.

  • Page 79: Xp1 Interface Status Indication (In Diagnostic Mode)

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 52 Laser relevant information query interface. 8.10 XP1 interface status indication (in diagnostic mode) The laser interface status indicator interface is shown in Figure 53. It is convenient to view the interface status information which represents the input and output status of the XP1 interface on the back panel.

  • Page 80: Log (In Diagnostic Mode)

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 53 The interface status in diagnostic mode 8.11 Log (in diagnostic mode) Laser’s working log interface is shown in Figure 54. User can query work log by entering the time to...

  • Page 81: Download Log

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 54 Laser’s working log interface 8.11.1 Download log Log download interface is shown in Figure 55. Figure 55 Log download interface...

  • Page 82: Downloadrecord Of Historicalfault

    Figure 57 the file address query interface for all downloaded information 9.128.12 Module parameters (in diagnostic mode) Laser module parameter query interface is show in Figure 58. The interface is for the parameter query in diagnostic mode from which Raycus technicians can analyze the cause of laser anomalies.

  • Page 83: Programming Settings (Programming Editing)

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 58 Module parameters query interface in diagnostic mode 9.138.13 Programming settings (programming editing) The laser programming settings interface is shown in Figure 59.

  • Page 84: View The Number Of Wave Bars Inside The Current Laser

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 59 the programming interface in programming editing mode. 8.13.1 View the number of wave bars inside the current laser Operating interfaces of viewing the number of wave bar stored inside the current laser is shown in Figure 60.

  • Page 85: Check Programming Content

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ Figure 60 operating interfaces of wave bar stored inside the current laser. 8.13.2 Check programming content To check the programming contents in the current laser programming mode is shown in Figure 61.

  • Page 86: Empty All Programmings

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ 8.13.3 Empty all programming Empty all programming interfaces stored in the current laser programming mode , as shown in Figure 62. All programming stored inside the current laser will be emptied by clicking ‘Empty Program List’.
  • Page 87 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ a) Select the pre-edited programming number. b) add command type...
  • Page 88 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ C) save command d) type the command code into laser...

  • Page 89: Command Explanation

    Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ e) check effectiveness of instruction Figure 63 A diagram of the programming editing operation in programming mode 8.13.5 Command Explanation Command meaning in laser working status is shown in Table 17...

  • Page 90: Warranty, Repair And Return

    Warranty, Repair and Return 9.1 General Warranty After all the products manufactured are delivered according to the order or specifications, Raycus will guarantee the products to be free from any material and technical problems and ensure that they meet the specifications under Normal use.

  • Page 91: Limitations Of Warranty

     This product has no built-in parts for user maintenance, so all maintenance should be carried out by Raycus technical personnel.  In case of any alarm during the use of the product, the technical personnel of Raycus shall be informed in time and troubleshooting shall be carried out.
  • Page 92 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C20000XZ The above product warranty and service terms of Raycus are for users' reference only, and the formal service and warranty contents are subject to agreement in the contract. ©2021 Wuhan Raycus Fiber Laser technologies Co. Ltd., All Rights Reserved.

Table of Contents