Terminal Dm+ And Dm- Output Signal Selection - YASKAWA A1000 Series Quick Start Manual

3.8 Control I/O Connections
u

Terminal DM+ and DM- Output Signal Selection

Slide switch S6 selects N.C. or N.O. as the state of the DM+ and DM- terminals for EDM output. The switch is initially set
to N.C. Slide switch S6 is available on terminal board ETC74030o.
S2 Position
N.O.
N.C.
Note: Refer to Safe Disable Input Function on page 352
114
Table 3.19 EDM Switch Settings
Normally open
Normally closed (default setting)
for details on EDM.
YASKAWA ELECTRIC TOEP C710616 41G YASKAWA AC Drive - A1000 Quick Start Guide
Description